-- -- Copyright(C) 2003-2017 Server Technology, Inc. -- Sentry4-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, enterprises, Integer32, OBJECT-TYPE, NOTIFICATION-TYPE FROM SNMPv2-SMI OBJECT-GROUP, NOTIFICATION-GROUP, MODULE-COMPLIANCE FROM SNMPv2-CONF TEXTUAL-CONVENTION, DisplayString FROM SNMPv2-TC; sentry4 MODULE-IDENTITY LAST-UPDATED "201708251530Z" -- 25 August 2017 ORGANIZATION "Server Technology, Inc." CONTACT-INFO "Server Technology, Inc. 1040 Sandhill Road Reno, NV 89521 Tel: (775) 284-2000 Fax: (775) 284-2065 Email: mibmaster@servertech.com" DESCRIPTION "This is the MIB module for the fourth generation of the Sentry product family. This includes the PRO1 and PRO2 series of Smart and Switched Power Distribution Unit (PDU), Cabinet Distribution Unit (CDU), Universal Power Distribution Unit (UPDU), and Inline Meter products." REVISION "201708251530Z" -- 25 August 2017 DESCRIPTION "Added the st4OutletSocketAdapter object. Renamed the first two enumerations of st4UnitType to just 'master' and 'link'." REVISION "201706151830Z" -- 15 June 2017 DESCRIPTION "Added support for fan sensors, including objects for installed count, identification, speed and status monitoring, threshold and hysteresis configuration, and a notification for events. Added the st4UnitOutletDisplayOrder object." REVISION "201611182340Z" -- 18 November 2016 DESCRIPTION "Added the st4UnitProductMfrDate object. Adjusted the upper limit of voltage objects to 600 Volts." REVISION "201609212300Z" -- 21 September 2016 DESCRIPTION "Fixed the st4InputCordOutOfBalanceEvent notification definition to include the correct objects." REVISION "201604252140Z" -- 25 April 2016 DESCRIPTION "Added support for the PRO1 product series. Added the st4SystemProductSeries and st4InputCordNominalPowerFactor objects. Adjusted the upper limit of cord and line current objects to 600 Amps. Adjusted the lower limit of nominal voltage objects to 0 Volts. Corrected the lower limit of several configuration objects from -1 to 0." REVISION "201502191000Z" -- 19 February 2015 DESCRIPTION "Corrected the UNITS and value range of temperature sensor threshold objects." REVISION "201412231130Z" -- 23 December 2014 DESCRIPTION "Initial release." ::= { serverTech 4 } serverTech OBJECT IDENTIFIER ::= { enterprises 1718 } -- Common Definitions DeviceStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Status returned by devices." SYNTAX INTEGER { normal(0), -- operating properly disabled(1), -- disabled purged(2), -- purged reading(5), -- read in process settle(6), -- is settling notFound(7), -- never connected lost(8), -- disconnected readError(9), -- read failure noComm(10), -- unreachable pwrError(11), -- power detection error breakerTripped(12), -- breaker error fuseBlown(13), -- fuse error lowAlarm(14), -- under low alarm threshold lowWarning(15), -- under low warning threshold highWarning(16), -- over high warning threshold highAlarm(17), -- over high alarm threshold alarm(18), -- general alarm underLimit(19), -- under limit alarm overLimit(20), -- over limit alarm nvmFail(21), -- NVM failure profileError(22), -- profile error conflict(23) -- conflict } DeviceState ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "On or off state of devices." SYNTAX INTEGER { unknown(0), -- on / off state is unknown on(1), -- is on off(2) -- is off } EventNotificationMethods ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Bits to enable event notification methods." SYNTAX BITS { snmpTrap(0), -- enables notifications by SNMP traps email(1) -- enables notifications by Email } -- Object Definitions st4Objects OBJECT IDENTIFIER ::= { sentry4 1 } -- System st4System OBJECT IDENTIFIER ::= { st4Objects 1 } -- System Configuration st4SystemConfig OBJECT IDENTIFIER ::= { st4System 1 } st4SystemProductName OBJECT-TYPE SYNTAX DisplayString(SIZE(0..63)) MAX-ACCESS read-only STATUS current DESCRIPTION "The product name." ::= { st4SystemConfig 1 } st4SystemLocation OBJECT-TYPE SYNTAX DisplayString(SIZE(0..63)) MAX-ACCESS read-write STATUS current DESCRIPTION "The location of the system." ::= { st4SystemConfig 2 } st4SystemFirmwareVersion OBJECT-TYPE SYNTAX DisplayString(SIZE(0..63)) MAX-ACCESS read-only STATUS current DESCRIPTION "The firmware version." ::= { st4SystemConfig 3 } st4SystemFirmwareBuildInfo OBJECT-TYPE SYNTAX DisplayString(SIZE(0..63)) MAX-ACCESS read-only STATUS current DESCRIPTION "The firmware build information." ::= { st4SystemConfig 4 } st4SystemNICSerialNumber OBJECT-TYPE SYNTAX DisplayString(SIZE(0..8)) MAX-ACCESS read-only STATUS current DESCRIPTION "The serial number of the network interface card." ::= { st4SystemConfig 5 } st4SystemNICHardwareInfo OBJECT-TYPE SYNTAX DisplayString(SIZE(0..63)) MAX-ACCESS read-only STATUS current DESCRIPTION "Hardware information about the network interface card." ::= { st4SystemConfig 6 } st4SystemProductSeries OBJECT-TYPE SYNTAX INTEGER { pro1(0), pro2(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "The product series." ::= { st4SystemConfig 7 } st4SystemFeatures OBJECT-TYPE SYNTAX BITS { smartLoadShedding(0), reserved(1), outletControlInhibit(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The key-activated features enabled in the system." ::= { st4SystemConfig 10 } st4SystemFeatureKey OBJECT-TYPE SYNTAX DisplayString(SIZE(0..19)) MAX-ACCESS read-write STATUS current DESCRIPTION "A valid feature key written to this object will enable a feature in the system. A valid feature key is in the form xxxx-xxxx-xxxx-xxxx. A read of this object returns an empty string." ::= { st4SystemConfig 11 } st4SystemConfigModifiedCount OBJECT-TYPE SYNTAX Integer32(0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of times the system configuration has changed." ::= { st4SystemConfig 20 } st4SystemUnitCount OBJECT-TYPE SYNTAX Integer32(0..8) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of units in the system." ::= { st4SystemConfig 21 } -- Units st4Units OBJECT IDENTIFIER ::= { st4Objects 2 } -- Unit Common Configuration st4UnitCommonConfig OBJECT IDENTIFIER ::= { st4Units 1 } -- Unit Configuration Table st4UnitConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF St4UnitConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Unit configuration table." ::= { st4Units 2 } st4UnitConfigEntry OBJECT-TYPE SYNTAX St4UnitConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configuration objects for a particular unit." INDEX { st4UnitIndex } ::= { st4UnitConfigTable 1 } St4UnitConfigEntry ::= SEQUENCE { st4UnitIndex Integer32, st4UnitID DisplayString, st4UnitName DisplayString, st4UnitProductSN DisplayString, st4UnitModel DisplayString, st4UnitAssetTag DisplayString, st4UnitType INTEGER, st4UnitCapabilities BITS, st4UnitProductMfrDate DisplayString, st4UnitDisplayOrientation INTEGER, st4UnitOutletSequenceOrder INTEGER, st4UnitOutletDisplayOrder INTEGER, st4UnitInputCordCount Integer32, st4UnitTempSensorCount Integer32, st4UnitHumidSensorCount Integer32, st4UnitWaterSensorCount Integer32, st4UnitCcSensorCount Integer32, st4UnitAdcSensorCount Integer32, st4UnitFanSensorCount Integer32 } st4UnitIndex OBJECT-TYPE SYNTAX Integer32(1..6) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Unit index. A=1, B=2, C=3, D=4, E=5, F=6." ::= { st4UnitConfigEntry 1 } st4UnitID OBJECT-TYPE SYNTAX DisplayString(SIZE(1)) MAX-ACCESS read-only STATUS current DESCRIPTION "The internal ID of the unit. Format=A." ::= { st4UnitConfigEntry 2 } st4UnitName OBJECT-TYPE SYNTAX DisplayString(SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The name of the unit." ::= { st4UnitConfigEntry 3 } st4UnitProductSN OBJECT-TYPE SYNTAX DisplayString(SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The product serial number of the unit." ::= { st4UnitConfigEntry 4 } st4UnitModel OBJECT-TYPE SYNTAX DisplayString(SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The model of the unit." ::= { st4UnitConfigEntry 5 } st4UnitAssetTag OBJECT-TYPE SYNTAX DisplayString(SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The asset tag of the unit." ::= { st4UnitConfigEntry 6 } st4UnitType OBJECT-TYPE SYNTAX INTEGER { master(0), link(1), controller(2), emcu(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of the unit." ::= { st4UnitConfigEntry 7 } st4UnitCapabilities OBJECT-TYPE SYNTAX BITS { dc(0), -- unit is DC phase3(1), -- unit is 3 phase wye(2), -- unit has Wye circuits delta(3) -- unit has Delta circuits } MAX-ACCESS read-only STATUS current DESCRIPTION "The capabilities of the unit." ::= { st4UnitConfigEntry 8 } st4UnitProductMfrDate OBJECT-TYPE SYNTAX DisplayString(SIZE(0..10)) MAX-ACCESS read-only STATUS current DESCRIPTION "The product manufacture date in YYYY-MM-DD (ISO 8601 format) of the unit." ::= { st4UnitConfigEntry 9 } st4UnitDisplayOrientation OBJECT-TYPE SYNTAX INTEGER { normal(0), inverted(1), auto(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The orientation of all displays in the unit." ::= { st4UnitConfigEntry 20 } st4UnitOutletSequenceOrder OBJECT-TYPE SYNTAX INTEGER { normal(0), reversed(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "The sequencing order of all outlets in the unit." ::= { st4UnitConfigEntry 21 } st4UnitOutletDisplayOrder OBJECT-TYPE SYNTAX INTEGER { normal(0), reversed(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "The display order in the user interfaces of all outlets in the unit." ::= { st4UnitConfigEntry 22 } st4UnitInputCordCount OBJECT-TYPE SYNTAX Integer32(0..4) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of power input cords into the unit." ::= { st4UnitConfigEntry 30 } st4UnitTempSensorCount OBJECT-TYPE SYNTAX Integer32(0..2) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of external temperature sensors supported by the unit." ::= { st4UnitConfigEntry 31 } st4UnitHumidSensorCount OBJECT-TYPE SYNTAX Integer32(0..2) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of external humidity sensors supported by the unit." ::= { st4UnitConfigEntry 32 } st4UnitWaterSensorCount OBJECT-TYPE SYNTAX Integer32(0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of external water sensors supported by the unit." ::= { st4UnitConfigEntry 33 } st4UnitCcSensorCount OBJECT-TYPE SYNTAX Integer32(0..4) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of external contact closure sensors supported by the unit." ::= { st4UnitConfigEntry 34 } st4UnitAdcSensorCount OBJECT-TYPE SYNTAX Integer32(0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of analog-to-digital converter sensors supported by the unit." ::= { st4UnitConfigEntry 35 } st4UnitFanSensorCount OBJECT-TYPE SYNTAX Integer32(0..4) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of fan sensors supported by the unit." ::= { st4UnitConfigEntry 36 } -- Unit Monitor Table st4UnitMonitorTable OBJECT-TYPE SYNTAX SEQUENCE OF St4UnitMonitorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Unit monitor table." ::= { st4Units 3 } st4UnitMonitorEntry OBJECT-TYPE SYNTAX St4UnitMonitorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Objects to monitor for a particular unit." INDEX { st4UnitIndex } ::= { st4UnitMonitorTable 1 } St4UnitMonitorEntry ::= SEQUENCE { st4UnitStatus DeviceStatus } st4UnitStatus OBJECT-TYPE SYNTAX DeviceStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The status of the unit." ::= { st4UnitMonitorEntry 1 } -- Unit Event Configuration Table st4UnitEventConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF St4UnitEventConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Unit event configuration table." ::= { st4Units 4 } st4UnitEventConfigEntry OBJECT-TYPE SYNTAX St4UnitEventConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Event configuration objects for a particular unit." INDEX { st4UnitIndex } ::= { st4UnitEventConfigTable 1 } St4UnitEventConfigEntry ::= SEQUENCE { st4UnitNotifications EventNotificationMethods } st4UnitNotifications OBJECT-TYPE SYNTAX EventNotificationMethods MAX-ACCESS read-write STATUS current DESCRIPTION "The notification methods enabled for unit events." ::= { st4UnitEventConfigEntry 1 } -- Input Cords st4InputCords OBJECT IDENTIFIER ::= { st4Objects 3 } -- Input Cord Common Configuration st4InputCordCommonConfig OBJECT IDENTIFIER ::= { st4InputCords 1 } st4InputCordActivePowerHysteresis OBJECT-TYPE SYNTAX Integer32(0..1000) UNITS "Watts" MAX-ACCESS read-write STATUS current DESCRIPTION "The active power hysteresis of the input cord in Watts." ::= { st4InputCordCommonConfig 1 } st4InputCordApparentPowerHysteresis OBJECT-TYPE SYNTAX Integer32(0..1000) UNITS "Volt-Amps" MAX-ACCESS read-write STATUS current DESCRIPTION "The apparent power hysteresis of the input cord in Volt-Amps." ::= { st4InputCordCommonConfig 2 } st4InputCordPowerFactorHysteresis OBJECT-TYPE SYNTAX Integer32(0..20) UNITS "hundredths" MAX-ACCESS read-write STATUS current DESCRIPTION "The power factor hysteresis of the input cord in hundredths." ::= { st4InputCordCommonConfig 3 } st4InputCordOutOfBalanceHysteresis OBJECT-TYPE SYNTAX Integer32(0..10) UNITS "percent" MAX-ACCESS read-write STATUS current DESCRIPTION "The 3 phase out-of-balance hysteresis of the input cord in percent." ::= { st4InputCordCommonConfig 4 } -- Input Cord Configuration Table st4InputCordConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF St4InputCordConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Input cord configuration table." ::= { st4InputCords 2 } st4InputCordConfigEntry OBJECT-TYPE SYNTAX St4InputCordConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configuration objects for a particular input cord." INDEX { st4UnitIndex, st4InputCordIndex } ::= { st4InputCordConfigTable 1 } St4InputCordConfigEntry ::= SEQUENCE { st4InputCordIndex Integer32, st4InputCordID DisplayString, st4InputCordName DisplayString, st4InputCordInletType DisplayString, st4InputCordNominalVoltage Integer32, st4InputCordNominalVoltageMin Integer32, st4InputCordNominalVoltageMax Integer32, st4InputCordCurrentCapacity Integer32, st4InputCordCurrentCapacityMax Integer32, st4InputCordPowerCapacity Integer32, st4InputCordNominalPowerFactor Integer32, st4InputCordLineCount Integer32, st4InputCordPhaseCount Integer32, st4InputCordOcpCount Integer32, st4InputCordBranchCount Integer32, st4InputCordOutletCount Integer32 } st4InputCordIndex OBJECT-TYPE SYNTAX Integer32(1..4) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Input cord index. A=1, B=2, C=3, D=4." ::= { st4InputCordConfigEntry 1 } st4InputCordID OBJECT-TYPE SYNTAX DisplayString(SIZE(2)) MAX-ACCESS read-only STATUS current DESCRIPTION "The internal ID of the input cord. Format=AA." ::= { st4InputCordConfigEntry 2 } st4InputCordName OBJECT-TYPE SYNTAX DisplayString(SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The name of the input cord." ::= { st4InputCordConfigEntry 3 } st4InputCordInletType OBJECT-TYPE SYNTAX DisplayString(SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The type of plug on the input cord, or socket for the input cord." ::= { st4InputCordConfigEntry 6} st4InputCordNominalVoltage OBJECT-TYPE SYNTAX Integer32(0..6000) UNITS "tenth Volts" MAX-ACCESS read-write STATUS current DESCRIPTION "The user-configured nominal voltage of the input cord in tenth Volts." ::= { st4InputCordConfigEntry 7 } st4InputCordNominalVoltageMin OBJECT-TYPE SYNTAX Integer32(0..600) UNITS "Volts" MAX-ACCESS read-only STATUS current DESCRIPTION "The factory-set minimum allowed for the user-configured nominal voltage of the input cord in Volts." ::= { st4InputCordConfigEntry 8 } st4InputCordNominalVoltageMax OBJECT-TYPE SYNTAX Integer32(0..600) UNITS "Volts" MAX-ACCESS read-only STATUS current DESCRIPTION "The factory-set maximum allowed for the user-configured nominal voltage of the input cord in Volts." ::= { st4InputCordConfigEntry 9 } st4InputCordCurrentCapacity OBJECT-TYPE SYNTAX Integer32(0..600) UNITS "Amps" MAX-ACCESS read-write STATUS current DESCRIPTION "The user-configured current capacity of the input cord in Amps." ::= { st4InputCordConfigEntry 10 } st4InputCordCurrentCapacityMax OBJECT-TYPE SYNTAX Integer32(0..600) UNITS "Amps" MAX-ACCESS read-only STATUS current DESCRIPTION "The factory-set maximum allowed for the user-configured current capacity of the input cord in Amps." ::= { st4InputCordConfigEntry 11 } st4InputCordPowerCapacity OBJECT-TYPE SYNTAX Integer32(0..50000) UNITS "Volt-Amps" MAX-ACCESS read-only STATUS current DESCRIPTION "The power capacity of the input cord in Volt-Amps. For DC products, this is identical to power capacity in Watts." ::= { st4InputCordConfigEntry 12 } st4InputCordNominalPowerFactor OBJECT-TYPE SYNTAX Integer32(0..100) UNITS "hundredths" MAX-ACCESS read-write STATUS current DESCRIPTION "The user-configured estimated nominal power factor of the input cord in hundredths." ::= { st4InputCordConfigEntry 13 } st4InputCordLineCount OBJECT-TYPE SYNTAX Integer32(0..4) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of current-carrying lines in the input cord." ::= { st4InputCordConfigEntry 20 } st4InputCordPhaseCount OBJECT-TYPE SYNTAX Integer32(0..6) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of active phases from the lines in the input cord." ::= { st4InputCordConfigEntry 21 } st4InputCordOcpCount OBJECT-TYPE SYNTAX Integer32(0..12) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of over-current protectors downstream from the input cord." ::= { st4InputCordConfigEntry 22 } st4InputCordBranchCount OBJECT-TYPE SYNTAX Integer32(0..12) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of branches downstream from the input cord." ::= { st4InputCordConfigEntry 23 } st4InputCordOutletCount OBJECT-TYPE SYNTAX Integer32(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of outlets powered from the input cord." ::= { st4InputCordConfigEntry 24 } -- Input Cord Monitor Table st4InputCordMonitorTable OBJECT-TYPE SYNTAX SEQUENCE OF St4InputCordMonitorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Input cord monitor table." ::= { st4InputCords 3 } st4InputCordMonitorEntry OBJECT-TYPE SYNTAX St4InputCordMonitorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Objects to monitor for a particular input cord." INDEX { st4UnitIndex, st4InputCordIndex } ::= { st4InputCordMonitorTable 1 } St4InputCordMonitorEntry ::= SEQUENCE { st4InputCordState DeviceState, st4InputCordStatus DeviceStatus, st4InputCordActivePower Integer32, st4InputCordActivePowerStatus DeviceStatus, st4InputCordApparentPower Integer32, st4InputCordApparentPowerStatus DeviceStatus, st4InputCordPowerUtilized Integer32, st4InputCordPowerFactor Integer32, st4InputCordPowerFactorStatus DeviceStatus, st4InputCordEnergy Integer32, st4InputCordFrequency Integer32, st4InputCordOutOfBalance Integer32, st4InputCordOutOfBalanceStatus DeviceStatus } st4InputCordState OBJECT-TYPE SYNTAX DeviceState MAX-ACCESS read-only STATUS current DESCRIPTION "The on/off state of the input cord." ::= { st4InputCordMonitorEntry 1 } st4InputCordStatus OBJECT-TYPE SYNTAX DeviceStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The status of the input cord." ::= { st4InputCordMonitorEntry 2 } st4InputCordActivePower OBJECT-TYPE SYNTAX Integer32(-1..50000) UNITS "Watts" MAX-ACCESS read-only STATUS current DESCRIPTION "The measured active power of the input cord in Watts." ::= { st4InputCordMonitorEntry 3 } st4InputCordActivePowerStatus OBJECT-TYPE SYNTAX DeviceStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The status of the measured active power of the input cord." ::= { st4InputCordMonitorEntry 4 } st4InputCordApparentPower OBJECT-TYPE SYNTAX Integer32(-1..50000) UNITS "Volt-Amps" MAX-ACCESS read-only STATUS current DESCRIPTION "The measured apparent power of the input cord in Volt-Amps." ::= { st4InputCordMonitorEntry 5 } st4InputCordApparentPowerStatus OBJECT-TYPE SYNTAX DeviceStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The status of the measured apparent power of the input cord." ::= { st4InputCordMonitorEntry 6 } st4InputCordPowerUtilized OBJECT-TYPE SYNTAX Integer32(-1..1200) UNITS "tenth percent" MAX-ACCESS read-only STATUS current DESCRIPTION "The amount of the input cord power capacity used in tenth percent. For AC products, this is the ratio of the apparent power to the power capacity. For DC products, this is the ratio of the active power to the power capacity." ::= { st4InputCordMonitorEntry 7 } st4InputCordPowerFactor OBJECT-TYPE SYNTAX Integer32(-1..100) UNITS "hundredths" MAX-ACCESS read-only STATUS current DESCRIPTION "The measured power factor of the input cord in hundredths." ::= { st4InputCordMonitorEntry 8 } st4InputCordPowerFactorStatus OBJECT-TYPE SYNTAX DeviceStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The status of the measured power factor of the input cord." ::= { st4InputCordMonitorEntry 9 } st4InputCordEnergy OBJECT-TYPE SYNTAX Integer32(-1..2147483647) UNITS "tenth Kilowatt-Hours" MAX-ACCESS read-only STATUS current DESCRIPTION "The total energy consumption of loads through the input cord in tenth Kilowatt-Hours." ::= { st4InputCordMonitorEntry 10 } st4InputCordFrequency OBJECT-TYPE SYNTAX Integer32(-1..1000) UNITS "tenth Hertz" MAX-ACCESS read-only STATUS current DESCRIPTION "The frequency of the input cord voltage in tenth Hertz." ::= { st4InputCordMonitorEntry 11 } st4InputCordOutOfBalance OBJECT-TYPE SYNTAX Integer32(-1..2000) UNITS "tenth percent" MAX-ACCESS read-only STATUS current DESCRIPTION "The current imbalance on the lines of the input cord in tenth percent." ::= { st4InputCordMonitorEntry 12 } st4InputCordOutOfBalanceStatus OBJECT-TYPE SYNTAX DeviceStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The status of the current imbalance on the lines of the input cord." ::= { st4InputCordMonitorEntry 13 } -- Input Cord Event Configuration Table st4InputCordEventConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF St4InputCordEventConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Input cord event configuration table." ::= { st4InputCords 4 } st4InputCordEventConfigEntry OBJECT-TYPE SYNTAX St4InputCordEventConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Event configuration objects for a particular input cord." INDEX { st4UnitIndex, st4InputCordIndex } ::= { st4InputCordEventConfigTable 1 } St4InputCordEventConfigEntry ::= SEQUENCE { st4InputCordNotifications EventNotificationMethods, st4InputCordActivePowerLowAlarm Integer32, st4InputCordActivePowerLowWarning Integer32, st4InputCordActivePowerHighWarning Integer32, st4InputCordActivePowerHighAlarm Integer32, st4InputCordApparentPowerLowAlarm Integer32, st4InputCordApparentPowerLowWarning Integer32, st4InputCordApparentPowerHighWarning Integer32, st4InputCordApparentPowerHighAlarm Integer32, st4InputCordPowerFactorLowAlarm Integer32, st4InputCordPowerFactorLowWarning Integer32, st4InputCordOutOfBalanceHighWarning Integer32, st4InputCordOutOfBalanceHighAlarm Integer32 } st4InputCordNotifications OBJECT-TYPE SYNTAX EventNotificationMethods MAX-ACCESS read-write STATUS current DESCRIPTION "The notification methods enabled for input cord events." ::= { st4InputCordEventConfigEntry 1 } st4InputCordActivePowerLowAlarm OBJECT-TYPE SYNTAX Integer32(0..50000) UNITS "Watts" MAX-ACCESS read-write STATUS current DESCRIPTION "The active power low alarm threshold of the input cord in Watts." ::= { st4InputCordEventConfigEntry 2 } st4InputCordActivePowerLowWarning OBJECT-TYPE SYNTAX Integer32(0..50000) UNITS "Watts" MAX-ACCESS read-write STATUS current DESCRIPTION "The active power low warning threshold of the input cord in Watts." ::= { st4InputCordEventConfigEntry 3 } st4InputCordActivePowerHighWarning OBJECT-TYPE SYNTAX Integer32(0..50000) UNITS "Watts" MAX-ACCESS read-write STATUS current DESCRIPTION "The active power high warning threshold of the input cord in Watts." ::= { st4InputCordEventConfigEntry 4 } st4InputCordActivePowerHighAlarm OBJECT-TYPE SYNTAX Integer32(0..50000) UNITS "Watts" MAX-ACCESS read-write STATUS current DESCRIPTION "The active power high alarm threshold of the input cord in Watts." ::= { st4InputCordEventConfigEntry 5 } st4InputCordApparentPowerLowAlarm OBJECT-TYPE SYNTAX Integer32(0..50000) UNITS "Volt-Amps" MAX-ACCESS read-write STATUS current DESCRIPTION "The apparent power low alarm threshold of the input cord in Volt-Amps." ::= { st4InputCordEventConfigEntry 6 } st4InputCordApparentPowerLowWarning OBJECT-TYPE SYNTAX Integer32(0..50000) UNITS "Volt-Amps" MAX-ACCESS read-write STATUS current DESCRIPTION "The apparent power low warning threshold of the input cord in Volt-Amps." ::= { st4InputCordEventConfigEntry 7 } st4InputCordApparentPowerHighWarning OBJECT-TYPE SYNTAX Integer32(0..50000) UNITS "Volt-Amps" MAX-ACCESS read-write STATUS current DESCRIPTION "The apparent power high warning threshold of the input cord in Volt-Amps." ::= { st4InputCordEventConfigEntry 8 } st4InputCordApparentPowerHighAlarm OBJECT-TYPE SYNTAX Integer32(0..50000) UNITS "Volt-Amps" MAX-ACCESS read-write STATUS current DESCRIPTION "The apparent power high alarm threshold of the input cord in Volt-Amps." ::= { st4InputCordEventConfigEntry 9 } st4InputCordPowerFactorLowAlarm OBJECT-TYPE SYNTAX Integer32(0..100) UNITS "hundredths" MAX-ACCESS read-write STATUS current DESCRIPTION "The power factor low alarm threshold of the input cord in hundredths." ::= { st4InputCordEventConfigEntry 10 } st4InputCordPowerFactorLowWarning OBJECT-TYPE SYNTAX Integer32(0..100) UNITS "hundredths" MAX-ACCESS read-write STATUS current DESCRIPTION "The power factor low warning threshold of the input cord in hundredths." ::= { st4InputCordEventConfigEntry 11 } st4InputCordOutOfBalanceHighWarning OBJECT-TYPE SYNTAX Integer32(0..100) UNITS "percent" MAX-ACCESS read-write STATUS current DESCRIPTION "The 3 phase out-of-balance high warning threshold of the input cord in percent." ::= { st4InputCordEventConfigEntry 12 } st4InputCordOutOfBalanceHighAlarm OBJECT-TYPE SYNTAX Integer32(0..100) UNITS "percent" MAX-ACCESS read-write STATUS current DESCRIPTION "The 3 phase out-of-balance high alarm threshold of the input cord in percent." ::= { st4InputCordEventConfigEntry 13 } -- Lines st4Lines OBJECT IDENTIFIER ::= { st4Objects 4 } -- Line Common Configuration st4LineCommonConfig OBJECT IDENTIFIER ::= { st4Lines 1 } st4LineCurrentHysteresis OBJECT-TYPE SYNTAX Integer32(0..100) UNITS "tenth Amps" MAX-ACCESS read-write STATUS current DESCRIPTION "The current hysteresis of the line in tenth Amps." ::= { st4LineCommonConfig 1 } -- Line Configuration Table st4LineConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF St4LineConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Line configuration table." ::= { st4Lines 2 } st4LineConfigEntry OBJECT-TYPE SYNTAX St4LineConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configuration objects for a particular line." INDEX { st4UnitIndex, st4InputCordIndex, st4LineIndex } ::= { st4LineConfigTable 1 } St4LineConfigEntry ::= SEQUENCE { st4LineIndex Integer32, st4LineID DisplayString, st4LineLabel DisplayString, st4LineCurrentCapacity Integer32 } st4LineIndex OBJECT-TYPE SYNTAX Integer32(1..4) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Line index. L1=1, L2=2, L3=3, N=4." ::= { st4LineConfigEntry 1 } st4LineID OBJECT-TYPE SYNTAX DisplayString(SIZE(3)) MAX-ACCESS read-only STATUS current DESCRIPTION "The internal ID of the line. Format=AAN." ::= { st4LineConfigEntry 2 } st4LineLabel OBJECT-TYPE SYNTAX DisplayString(SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The system label assigned to the line for identification." ::= { st4LineConfigEntry 4 } st4LineCurrentCapacity OBJECT-TYPE SYNTAX Integer32(0..600) UNITS "Amps" MAX-ACCESS read-only STATUS current DESCRIPTION "The current capacity of the line in Amps." ::= { st4LineConfigEntry 6 } -- Line Monitor Table st4LineMonitorTable OBJECT-TYPE SYNTAX SEQUENCE OF St4LineMonitorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Line monitor table." ::= { st4Lines 3 } st4LineMonitorEntry OBJECT-TYPE SYNTAX St4LineMonitorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Objects to monitor for a particular line." INDEX { st4UnitIndex, st4InputCordIndex, st4LineIndex } ::= { st4LineMonitorTable 1 } St4LineMonitorEntry ::= SEQUENCE { st4LineState DeviceState, st4LineStatus DeviceStatus, st4LineCurrent Integer32, st4LineCurrentStatus DeviceStatus, st4LineCurrentUtilized Integer32 } st4LineState OBJECT-TYPE SYNTAX DeviceState MAX-ACCESS read-only STATUS current DESCRIPTION "The on/off state of the line." ::= { st4LineMonitorEntry 1 } st4LineStatus OBJECT-TYPE SYNTAX DeviceStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The status of the line." ::= { st4LineMonitorEntry 2 } st4LineCurrent OBJECT-TYPE SYNTAX Integer32(-1..60000) UNITS "hundredth Amps" MAX-ACCESS read-only STATUS current DESCRIPTION "The measured current on the line in hundredth Amps." ::= { st4LineMonitorEntry 3 } st4LineCurrentStatus OBJECT-TYPE SYNTAX DeviceStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The status of the measured current on the line." ::= { st4LineMonitorEntry 4 } st4LineCurrentUtilized OBJECT-TYPE SYNTAX Integer32(-1..1200) UNITS "tenth percent" MAX-ACCESS read-only STATUS current DESCRIPTION "The amount of the line current capacity used in tenth percent." ::= { st4LineMonitorEntry 5 } -- Line Event Configuration Table st4LineEventConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF St4LineEventConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Line event configuration table." ::= { st4Lines 4 } st4LineEventConfigEntry OBJECT-TYPE SYNTAX St4LineEventConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Event configuration objects for a particular line." INDEX { st4UnitIndex, st4InputCordIndex, st4LineIndex } ::= { st4LineEventConfigTable 1 } St4LineEventConfigEntry ::= SEQUENCE { st4LineNotifications EventNotificationMethods, st4LineCurrentLowAlarm Integer32, st4LineCurrentLowWarning Integer32, st4LineCurrentHighWarning Integer32, st4LineCurrentHighAlarm Integer32 } st4LineNotifications OBJECT-TYPE SYNTAX EventNotificationMethods MAX-ACCESS read-write STATUS current DESCRIPTION "The notification methods enabled for line events." ::= { st4LineEventConfigEntry 1 } st4LineCurrentLowAlarm OBJECT-TYPE SYNTAX Integer32(0..6000) UNITS "tenth Amps" MAX-ACCESS read-write STATUS current DESCRIPTION "The current low alarm threshold of the line in tenth Amps." ::= { st4LineEventConfigEntry 2 } st4LineCurrentLowWarning OBJECT-TYPE SYNTAX Integer32(0..6000) UNITS "tenth Amps" MAX-ACCESS read-write STATUS current DESCRIPTION "The current low warning threshold of the line in tenth Amps." ::= { st4LineEventConfigEntry 3 } st4LineCurrentHighWarning OBJECT-TYPE SYNTAX Integer32(0..6000) UNITS "tenth Amps" MAX-ACCESS read-write STATUS current DESCRIPTION "The current high warning threshold of the line in tenth Amps." ::= { st4LineEventConfigEntry 4 } st4LineCurrentHighAlarm OBJECT-TYPE SYNTAX Integer32(0..6000) UNITS "tenth Amps" MAX-ACCESS read-write STATUS current DESCRIPTION "The current high alarm threshold of the line in tenth Amps." ::= { st4LineEventConfigEntry 5 } -- Phases st4Phases OBJECT IDENTIFIER ::= { st4Objects 5 } -- Phase Common Configuration st4PhaseCommonConfig OBJECT IDENTIFIER ::= { st4Phases 1 } st4PhaseVoltageHysteresis OBJECT-TYPE SYNTAX Integer32(0..200) UNITS "tenth Volts" MAX-ACCESS read-write STATUS current DESCRIPTION "The voltage hysteresis of the phase in tenth Volts." ::= { st4PhaseCommonConfig 1 } st4PhasePowerFactorHysteresis OBJECT-TYPE SYNTAX Integer32(0..20) UNITS "hundredths" MAX-ACCESS read-write STATUS current DESCRIPTION "The power factor hysteresis of the phase in hundredths." ::= { st4PhaseCommonConfig 2 } -- Phase Configuration Table st4PhaseConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF St4PhaseConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Phase configuration table." ::= { st4Phases 2 } st4PhaseConfigEntry OBJECT-TYPE SYNTAX St4PhaseConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configuration objects for a particular phase." INDEX { st4UnitIndex, st4InputCordIndex, st4PhaseIndex } ::= { st4PhaseConfigTable 1 } St4PhaseConfigEntry ::= SEQUENCE { st4PhaseIndex Integer32, st4PhaseID DisplayString, st4PhaseLabel DisplayString, st4PhaseNominalVoltage Integer32, st4PhaseBranchCount Integer32, st4PhaseOutletCount Integer32 } st4PhaseIndex OBJECT-TYPE SYNTAX Integer32(1..6) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Phase index. Three-phase AC Wye: L1-N=1, L2-N=2, L3-N=3; Three-phase AC Delta: L1-L2=1, L2-L3=2, L3-L1=3; Single Phase: L1-R=1; DC: L1-R=1; Three-phase AC Wye & Delta: L1-N=1, L2-N=2, L3-N=3, L1-L2=4, L2-L3=5; L3-L1=6." ::= { st4PhaseConfigEntry 1 } st4PhaseID OBJECT-TYPE SYNTAX DisplayString(SIZE(3)) MAX-ACCESS read-only STATUS current DESCRIPTION "The internal ID of the phase. Format=AAN." ::= { st4PhaseConfigEntry 2 } st4PhaseLabel OBJECT-TYPE SYNTAX DisplayString(SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The system label assigned to the phase for identification." ::= { st4PhaseConfigEntry 4 } st4PhaseNominalVoltage OBJECT-TYPE SYNTAX Integer32(0..6000) UNITS "tenth Volts" MAX-ACCESS read-only STATUS current DESCRIPTION "The nominal voltage of the phase in tenth Volts." ::= { st4PhaseConfigEntry 6 } st4PhaseBranchCount OBJECT-TYPE SYNTAX Integer32(0..12) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of branches downstream from the phase." ::= { st4PhaseConfigEntry 20 } st4PhaseOutletCount OBJECT-TYPE SYNTAX Integer32(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of outlets powered from the phase." ::= { st4PhaseConfigEntry 21 } -- Phase Monitor Table st4PhaseMonitorTable OBJECT-TYPE SYNTAX SEQUENCE OF St4PhaseMonitorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Phase monitor table." ::= { st4Phases 3 } st4PhaseMonitorEntry OBJECT-TYPE SYNTAX St4PhaseMonitorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Objects to monitor for a particular phase." INDEX { st4UnitIndex, st4InputCordIndex, st4PhaseIndex } ::= { st4PhaseMonitorTable 1 } St4PhaseMonitorEntry ::= SEQUENCE { st4PhaseState DeviceState, st4PhaseStatus DeviceStatus, st4PhaseVoltage Integer32, st4PhaseVoltageStatus DeviceStatus, st4PhaseVoltageDeviation Integer32, st4PhaseCurrent Integer32, st4PhaseCurrentCrestFactor Integer32, st4PhaseActivePower Integer32, st4PhaseApparentPower Integer32, st4PhasePowerFactor Integer32, st4PhasePowerFactorStatus DeviceStatus, st4PhaseReactance Integer32, st4PhaseEnergy Integer32 } st4PhaseState OBJECT-TYPE SYNTAX DeviceState MAX-ACCESS read-only STATUS current DESCRIPTION "The on/off state of the phase." ::= { st4PhaseMonitorEntry 1 } st4PhaseStatus OBJECT-TYPE SYNTAX DeviceStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The status of the phase." ::= { st4PhaseMonitorEntry 2 } st4PhaseVoltage OBJECT-TYPE SYNTAX Integer32(-1..6000) UNITS "tenth Volts" MAX-ACCESS read-only STATUS current DESCRIPTION "The measured voltage on the phase in tenth Volts." ::= { st4PhaseMonitorEntry 3 } st4PhaseVoltageStatus OBJECT-TYPE SYNTAX DeviceStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The status of the measured voltage on the phase." ::= { st4PhaseMonitorEntry 4 } st4PhaseVoltageDeviation OBJECT-TYPE SYNTAX Integer32(-1000..1000) UNITS "tenth percent" MAX-ACCESS read-only STATUS current DESCRIPTION "The deviation from the nominal voltage on the phase in tenth percent." ::= { st4PhaseMonitorEntry 5 } st4PhaseCurrent OBJECT-TYPE SYNTAX Integer32(-1..30000) UNITS "hundredth Amps" MAX-ACCESS read-only STATUS current DESCRIPTION "The measured current on the phase in hundredth Amps." ::= { st4PhaseMonitorEntry 6 } st4PhaseCurrentCrestFactor OBJECT-TYPE SYNTAX Integer32(-1..250) UNITS "tenths" MAX-ACCESS read-only STATUS current DESCRIPTION "The measured crest factor of the current waveform on the phase in tenths." ::= { st4PhaseMonitorEntry 7 } st4PhaseActivePower OBJECT-TYPE SYNTAX Integer32(-1..25000) UNITS "Watts" MAX-ACCESS read-only STATUS current DESCRIPTION "The measured active power on the phase in Watts." ::= { st4PhaseMonitorEntry 8 } st4PhaseApparentPower OBJECT-TYPE SYNTAX Integer32(-1..25000) UNITS "Volt-Amps" MAX-ACCESS read-only STATUS current DESCRIPTION "The measured apparent power on the phase in Volt-Amps." ::= { st4PhaseMonitorEntry 9 } st4PhasePowerFactor OBJECT-TYPE SYNTAX Integer32(-1..100) UNITS "hundredths" MAX-ACCESS read-only STATUS current DESCRIPTION "The measured power factor on the phase in hundredths." ::= { st4PhaseMonitorEntry 10 } st4PhasePowerFactorStatus OBJECT-TYPE SYNTAX DeviceStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The status of the measured power factor on the phase." ::= { st4PhaseMonitorEntry 11 } st4PhaseReactance OBJECT-TYPE SYNTAX INTEGER { unknown(0), capacitive(1), inductive(2), resistive(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of the measured reactance of the phase." ::= { st4PhaseMonitorEntry 12 } st4PhaseEnergy OBJECT-TYPE SYNTAX Integer32(-1..2147483647) UNITS "tenth Kilowatt-Hours" MAX-ACCESS read-only STATUS current DESCRIPTION "The total energy consumption of loads through the phase in tenth Kilowatt-Hours." ::= { st4PhaseMonitorEntry 13 } -- Phase Event Configuration Table st4PhaseEventConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF St4PhaseEventConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Phase event configuration table." ::= { st4Phases 4 } st4PhaseEventConfigEntry OBJECT-TYPE SYNTAX St4PhaseEventConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Event configuration objects for a particular phase." INDEX { st4UnitIndex, st4InputCordIndex, st4PhaseIndex } ::= { st4PhaseEventConfigTable 1 } St4PhaseEventConfigEntry ::= SEQUENCE { st4PhaseNotifications EventNotificationMethods, st4PhaseVoltageLowAlarm Integer32, st4PhaseVoltageLowWarning Integer32, st4PhaseVoltageHighWarning Integer32, st4PhaseVoltageHighAlarm Integer32, st4PhasePowerFactorLowAlarm Integer32, st4PhasePowerFactorLowWarning Integer32 } st4PhaseNotifications OBJECT-TYPE SYNTAX EventNotificationMethods MAX-ACCESS read-write STATUS current DESCRIPTION "The notification methods enabled for phase events." ::= { st4PhaseEventConfigEntry 1 } st4PhaseVoltageLowAlarm OBJECT-TYPE SYNTAX Integer32(0..6000) UNITS "tenth Volts" MAX-ACCESS read-write STATUS current DESCRIPTION "The current low alarm threshold of the phase in tenth Volts." ::= { st4PhaseEventConfigEntry 2 } st4PhaseVoltageLowWarning OBJECT-TYPE SYNTAX Integer32(0..6000) UNITS "tenth Volts" MAX-ACCESS read-write STATUS current DESCRIPTION "The current low warning threshold of the phase in tenth Volts." ::= { st4PhaseEventConfigEntry 3 } st4PhaseVoltageHighWarning OBJECT-TYPE SYNTAX Integer32(0..6000) UNITS "tenth Volts" MAX-ACCESS read-write STATUS current DESCRIPTION "The current high warning threshold of the phase in tenth Volts." ::= { st4PhaseEventConfigEntry 4 } st4PhaseVoltageHighAlarm OBJECT-TYPE SYNTAX Integer32(0..6000) UNITS "tenth Volts" MAX-ACCESS read-write STATUS current DESCRIPTION "The current high alarm threshold of the phase in tenth Volts." ::= { st4PhaseEventConfigEntry 5 } st4PhasePowerFactorLowAlarm OBJECT-TYPE SYNTAX Integer32(0..100) UNITS "hundredths" MAX-ACCESS read-write STATUS current DESCRIPTION "The low power factor alarm threshold of the phase in hundredths." ::= { st4PhaseEventConfigEntry 6 } st4PhasePowerFactorLowWarning OBJECT-TYPE SYNTAX Integer32(0..100) UNITS "hundredths" MAX-ACCESS read-write STATUS current DESCRIPTION "The low power factor warning threshold of the phase in hundredths." ::= { st4PhaseEventConfigEntry 7 } -- Over-Current Protectors st4OverCurrentProtectors OBJECT IDENTIFIER ::= { st4Objects 6 } -- Over-Current Protector Common Configuration st4OcpCommonConfig OBJECT IDENTIFIER ::= { st4OverCurrentProtectors 1 } -- Over-Current Protector Configuration Table st4OcpConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF St4OcpConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Over-current protector configuration table." ::= { st4OverCurrentProtectors 2 } st4OcpConfigEntry OBJECT-TYPE SYNTAX St4OcpConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configuration objects for a particular over-current protector." INDEX { st4UnitIndex, st4InputCordIndex, st4OcpIndex } ::= { st4OcpConfigTable 1 } St4OcpConfigEntry ::= SEQUENCE { st4OcpIndex Integer32, st4OcpID DisplayString, st4OcpLabel DisplayString, st4OcpType INTEGER, st4OcpCurrentCapacity Integer32, st4OcpCurrentCapacityMax Integer32, st4OcpBranchCount Integer32, st4OcpOutletCount Integer32 } st4OcpIndex OBJECT-TYPE SYNTAX Integer32(1..64) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Over-current protector index." ::= { st4OcpConfigEntry 1 } st4OcpID OBJECT-TYPE SYNTAX DisplayString(SIZE(3..4)) MAX-ACCESS read-only STATUS current DESCRIPTION "The internal ID of the over-current protector. Format=AAN[N]." ::= { st4OcpConfigEntry 2 } st4OcpLabel OBJECT-TYPE SYNTAX DisplayString(SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The system label assigned to the over-current protector for identification." ::= { st4OcpConfigEntry 4 } st4OcpType OBJECT-TYPE SYNTAX INTEGER { fuse(0), breaker(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of over-current protector." ::= { st4OcpConfigEntry 6 } st4OcpCurrentCapacity OBJECT-TYPE SYNTAX Integer32(0..125) UNITS "Amps" MAX-ACCESS read-write STATUS current DESCRIPTION "The user-configured current capacity of the over-current protector in Amps." ::= { st4OcpConfigEntry 7 } st4OcpCurrentCapacityMax OBJECT-TYPE SYNTAX Integer32(0..125) UNITS "Amps" MAX-ACCESS read-only STATUS current DESCRIPTION "The factory-set maximum allowed for the user-configured current capacity of the over-current protector in Amps." ::= { st4OcpConfigEntry 8 } st4OcpBranchCount OBJECT-TYPE SYNTAX Integer32(0..12) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of branches downstream from the over-current protector." ::= { st4OcpConfigEntry 20 } st4OcpOutletCount OBJECT-TYPE SYNTAX Integer32(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of outlets powered from the over-current protector." ::= { st4OcpConfigEntry 21 } -- Over-Current Protector Monitor Table st4OcpMonitorTable OBJECT-TYPE SYNTAX SEQUENCE OF St4OcpMonitorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Over-current protector monitor table." ::= { st4OverCurrentProtectors 3 } st4OcpMonitorEntry OBJECT-TYPE SYNTAX St4OcpMonitorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Objects to monitor for a particular over-current protector." INDEX { st4UnitIndex, st4InputCordIndex, st4OcpIndex } ::= { st4OcpMonitorTable 1 } St4OcpMonitorEntry ::= SEQUENCE { st4OcpStatus DeviceStatus } st4OcpStatus OBJECT-TYPE SYNTAX DeviceStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The status of the over-current protector." ::= { st4OcpMonitorEntry 1 } -- Over-Current Protector Event Configuration Table st4OcpEventConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF St4OcpEventConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Over-current protector event configuration table." ::= { st4OverCurrentProtectors 4 } st4OcpEventConfigEntry OBJECT-TYPE SYNTAX St4OcpEventConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Event configuration objects for a particular over-current protector." INDEX { st4UnitIndex, st4InputCordIndex, st4OcpIndex } ::= { st4OcpEventConfigTable 1 } St4OcpEventConfigEntry ::= SEQUENCE { st4OcpNotifications EventNotificationMethods } st4OcpNotifications OBJECT-TYPE SYNTAX EventNotificationMethods MAX-ACCESS read-write STATUS current DESCRIPTION "The notification methods enabled for over-current protector events." ::= { st4OcpEventConfigEntry 1 } -- Branches st4Branches OBJECT IDENTIFIER ::= { st4Objects 7 } -- Branch Common Configuration st4BranchCommonConfig OBJECT IDENTIFIER ::= { st4Branches 1 } st4BranchCurrentHysteresis OBJECT-TYPE SYNTAX Integer32(0..100) UNITS "tenth Amps" MAX-ACCESS read-write STATUS current DESCRIPTION "The current hysteresis of the branch in tenth Amps." ::= { st4BranchCommonConfig 1 } -- Branch Configuration Table st4BranchConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF St4BranchConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Branch configuration table." ::= { st4Branches 2 } st4BranchConfigEntry OBJECT-TYPE SYNTAX St4BranchConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configuration objects for a particular branch." INDEX { st4UnitIndex, st4InputCordIndex, st4BranchIndex } ::= { st4BranchConfigTable 1 } St4BranchConfigEntry ::= SEQUENCE { st4BranchIndex Integer32, st4BranchID DisplayString, st4BranchLabel DisplayString, st4BranchCurrentCapacity Integer32, st4BranchPhaseID DisplayString, st4BranchOcpID DisplayString, st4BranchOutletCount Integer32 } st4BranchIndex OBJECT-TYPE SYNTAX Integer32(1..64) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Branch index." ::= { st4BranchConfigEntry 1 } st4BranchID OBJECT-TYPE SYNTAX DisplayString(SIZE(3..4)) MAX-ACCESS read-only STATUS current DESCRIPTION "The internal ID of the branch. Format=AAN[N]." ::= { st4BranchConfigEntry 2 } st4BranchLabel OBJECT-TYPE SYNTAX DisplayString(SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The system label assigned to the branch for identification." ::= { st4BranchConfigEntry 4 } st4BranchCurrentCapacity OBJECT-TYPE SYNTAX Integer32(0..125) UNITS "Amps" MAX-ACCESS read-only STATUS current DESCRIPTION "The current capacity of the branch in Amps." ::= { st4BranchConfigEntry 6 } st4BranchPhaseID OBJECT-TYPE SYNTAX DisplayString(SIZE(3)) MAX-ACCESS read-only STATUS current DESCRIPTION "The internal ID of the phase powering this branch. Format=AAN." ::= { st4BranchConfigEntry 20 } st4BranchOcpID OBJECT-TYPE SYNTAX DisplayString(SIZE(3..4)) MAX-ACCESS read-only STATUS current DESCRIPTION "The internal ID of the over-current protector powering this outlet. Format=AAN[N]." ::= { st4BranchConfigEntry 21 } st4BranchOutletCount OBJECT-TYPE SYNTAX Integer32(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of outlets powered from the branch." ::= { st4BranchConfigEntry 30 } -- Branch Monitor Table st4BranchMonitorTable OBJECT-TYPE SYNTAX SEQUENCE OF St4BranchMonitorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Branch monitor table." ::= { st4Branches 3 } st4BranchMonitorEntry OBJECT-TYPE SYNTAX St4BranchMonitorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Objects to monitor for a particular branch." INDEX { st4UnitIndex, st4InputCordIndex, st4BranchIndex } ::= { st4BranchMonitorTable 1 } St4BranchMonitorEntry ::= SEQUENCE { st4BranchState DeviceState, st4BranchStatus DeviceStatus, st4BranchCurrent Integer32, st4BranchCurrentStatus DeviceStatus, st4BranchCurrentUtilized Integer32 } st4BranchState OBJECT-TYPE SYNTAX DeviceState MAX-ACCESS read-only STATUS current DESCRIPTION "The on/off state of the branch." ::= { st4BranchMonitorEntry 1 } st4BranchStatus OBJECT-TYPE SYNTAX DeviceStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The status of the branch." ::= { st4BranchMonitorEntry 2 } st4BranchCurrent OBJECT-TYPE SYNTAX Integer32(-1..12500) UNITS "hundredth Amps" MAX-ACCESS read-only STATUS current DESCRIPTION "The measured current on the branch in hundredth Amps." ::= { st4BranchMonitorEntry 3 } st4BranchCurrentStatus OBJECT-TYPE SYNTAX DeviceStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The status of the measured current on the branch." ::= { st4BranchMonitorEntry 4 } st4BranchCurrentUtilized OBJECT-TYPE SYNTAX Integer32(-1..1200) UNITS "tenth percent" MAX-ACCESS read-only STATUS current DESCRIPTION "The amount of the branch current capacity used in tenth percent." ::= { st4BranchMonitorEntry 5 } -- Branch Event Configuration Table st4BranchEventConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF St4BranchEventConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Branch event configuration table." ::= { st4Branches 4 } st4BranchEventConfigEntry OBJECT-TYPE SYNTAX St4BranchEventConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Event configuration objects for a particular branch." INDEX { st4UnitIndex, st4InputCordIndex, st4BranchIndex } ::= { st4BranchEventConfigTable 1 } St4BranchEventConfigEntry ::= SEQUENCE { st4BranchNotifications EventNotificationMethods, st4BranchCurrentLowAlarm Integer32, st4BranchCurrentLowWarning Integer32, st4BranchCurrentHighWarning Integer32, st4BranchCurrentHighAlarm Integer32 } st4BranchNotifications OBJECT-TYPE SYNTAX EventNotificationMethods MAX-ACCESS read-write STATUS current DESCRIPTION "The notification methods enabled for branch events." ::= { st4BranchEventConfigEntry 1 } st4BranchCurrentLowAlarm OBJECT-TYPE SYNTAX Integer32(0..1250) UNITS "tenth Amps" MAX-ACCESS read-write STATUS current DESCRIPTION "The current low alarm threshold of the branch in tenth Amps." ::= { st4BranchEventConfigEntry 2 } st4BranchCurrentLowWarning OBJECT-TYPE SYNTAX Integer32(0..1250) UNITS "tenth Amps" MAX-ACCESS read-write STATUS current DESCRIPTION "The current low warning threshold of the branch in tenth Amps." ::= { st4BranchEventConfigEntry 3 } st4BranchCurrentHighWarning OBJECT-TYPE SYNTAX Integer32(0..1250) UNITS "tenth Amps" MAX-ACCESS read-write STATUS current DESCRIPTION "The current high warning threshold of the branch in tenth Amps." ::= { st4BranchEventConfigEntry 4 } st4BranchCurrentHighAlarm OBJECT-TYPE SYNTAX Integer32(0..1250) UNITS "tenth Amps" MAX-ACCESS read-write STATUS current DESCRIPTION "The current high alarm threshold of the branch in tenth Amps." ::= { st4BranchEventConfigEntry 5 } -- Outlets st4Outlets OBJECT IDENTIFIER ::= { st4Objects 8 } -- Outlet Common Configuration st4OutletCommonConfig OBJECT IDENTIFIER ::= { st4Outlets 1 } st4OutletCurrentHysteresis OBJECT-TYPE SYNTAX Integer32(0..100) UNITS "tenth Amps" MAX-ACCESS read-write STATUS current DESCRIPTION "The current hysteresis of the outlet in tenth Amps." ::= { st4OutletCommonConfig 1 } st4OutletActivePowerHysteresis OBJECT-TYPE SYNTAX Integer32(0..1000) UNITS "Watts" MAX-ACCESS read-write STATUS current DESCRIPTION "The power hysteresis of the outlet in Watts." ::= { st4OutletCommonConfig 2 } st4OutletPowerFactorHysteresis OBJECT-TYPE SYNTAX Integer32(0..20) UNITS "hundredths" MAX-ACCESS read-write STATUS current DESCRIPTION "The power factor hysteresis of the outlet in hundredths." ::= { st4OutletCommonConfig 3 } st4OutletSequenceInterval OBJECT-TYPE SYNTAX Integer32(0..15) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The power-on sequencing interval for all outlets in seconds." ::= { st4OutletCommonConfig 10 } st4OutletRebootDelay OBJECT-TYPE SYNTAX Integer32(5..600) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The reboot delay for all outlets in seconds." ::= { st4OutletCommonConfig 11 } st4OutletStateChangeLogging OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enables or disables informational Outlet State Change event logging." ::= { st4OutletCommonConfig 12 } -- Outlet Configuration Table st4OutletConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF St4OutletConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Outlet configuration table." ::= { st4Outlets 2 } st4OutletConfigEntry OBJECT-TYPE SYNTAX St4OutletConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configuration objects for a particular outlet." INDEX { st4UnitIndex, st4InputCordIndex, st4OutletIndex } ::= { st4OutletConfigTable 1 } St4OutletConfigEntry ::= SEQUENCE { st4OutletIndex Integer32, st4OutletID DisplayString, st4OutletName DisplayString, st4OutletCapabilities BITS, st4OutletSocketType DisplayString, st4OutletCurrentCapacity Integer32, st4OutletPowerCapacity Integer32, st4OutletSocketAdapter INTEGER, st4OutletWakeupState INTEGER, st4OutletPostOnDelay Integer32, st4OutletPhaseID DisplayString, st4OutletOcpID DisplayString, st4OutletBranchID DisplayString } st4OutletIndex OBJECT-TYPE SYNTAX Integer32(1..128) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Outlet index." ::= { st4OutletConfigEntry 1 } st4OutletID OBJECT-TYPE SYNTAX DisplayString(SIZE(3..5)) MAX-ACCESS read-only STATUS current DESCRIPTION "The internal ID of the outlet. Format=AAN[N[N]]." ::= { st4OutletConfigEntry 2 } st4OutletName OBJECT-TYPE SYNTAX DisplayString(SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The name of the outlet." ::= { st4OutletConfigEntry 3 } st4OutletCapabilities OBJECT-TYPE SYNTAX BITS { switched(0), -- outlet supports power control pops(1) -- outlet has pops } MAX-ACCESS read-only STATUS current DESCRIPTION "The capabilities of the outlet." ::= { st4OutletConfigEntry 5 } st4OutletSocketType OBJECT-TYPE SYNTAX DisplayString(SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The socket type of the outlet." ::= { st4OutletConfigEntry 6 } st4OutletCurrentCapacity OBJECT-TYPE SYNTAX Integer32(0..125) UNITS "Amps" MAX-ACCESS read-only STATUS current DESCRIPTION "The current capacity of the outlet in Amps." ::= { st4OutletConfigEntry 7 } st4OutletPowerCapacity OBJECT-TYPE SYNTAX Integer32(0..10000) UNITS "Volt-Amps" MAX-ACCESS read-only STATUS current DESCRIPTION "The power capacity of the outlet in Volt-Amps. For DC products, this is identical to power capacity in Watts." ::= { st4OutletConfigEntry 8 } st4OutletSocketAdapter OBJECT-TYPE SYNTAX INTEGER { none(0), c13(1), c19(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The manually-selected or automatically-detected socket adapter of the outlet." ::= { st4OutletConfigEntry 9 } st4OutletWakeupState OBJECT-TYPE SYNTAX INTEGER { on(0), off(1), last(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The wakeup state of the outlet." ::= { st4OutletConfigEntry 20 } st4OutletPostOnDelay OBJECT-TYPE SYNTAX Integer32(0..900) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The post-on delay of the outlet in seconds." ::= { st4OutletConfigEntry 21 } st4OutletPhaseID OBJECT-TYPE SYNTAX DisplayString(SIZE(3)) MAX-ACCESS read-only STATUS current DESCRIPTION "The internal ID of the phase powering this outlet. Format=AAN." ::= { st4OutletConfigEntry 30 } st4OutletOcpID OBJECT-TYPE SYNTAX DisplayString(SIZE(3..4)) MAX-ACCESS read-only STATUS current DESCRIPTION "The internal ID of the over-current protector powering this outlet. Format=AAN[N]." ::= { st4OutletConfigEntry 31 } st4OutletBranchID OBJECT-TYPE SYNTAX DisplayString(SIZE(3..4)) MAX-ACCESS read-only STATUS current DESCRIPTION "The internal ID of the branch powering this outlet. Format=AAN[N]." ::= { st4OutletConfigEntry 32 } -- Outlet Monitor Table st4OutletMonitorTable OBJECT-TYPE SYNTAX SEQUENCE OF St4OutletMonitorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Outlet monitor table." ::= { st4Outlets 3 } st4OutletMonitorEntry OBJECT-TYPE SYNTAX St4OutletMonitorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Objects to monitor for a particular outlet." INDEX { st4UnitIndex, st4InputCordIndex, st4OutletIndex } ::= { st4OutletMonitorTable 1 } St4OutletMonitorEntry ::= SEQUENCE { st4OutletState DeviceState, st4OutletStatus DeviceStatus, st4OutletCurrent Integer32, st4OutletCurrentStatus DeviceStatus, st4OutletCurrentUtilized Integer32, st4OutletVoltage Integer32, st4OutletActivePower Integer32, st4OutletActivePowerStatus DeviceStatus, st4OutletApparentPower Integer32, st4OutletPowerFactor Integer32, st4OutletPowerFactorStatus DeviceStatus, st4OutletCurrentCrestFactor Integer32, st4OutletReactance INTEGER, st4OutletEnergy Integer32 } st4OutletState OBJECT-TYPE SYNTAX DeviceState MAX-ACCESS read-only STATUS current DESCRIPTION "The on/off state of the outlet." ::= { st4OutletMonitorEntry 1 } st4OutletStatus OBJECT-TYPE SYNTAX DeviceStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The status of the outlet." ::= { st4OutletMonitorEntry 2 } st4OutletCurrent OBJECT-TYPE SYNTAX Integer32(-1..12500) UNITS "hundredth Amps" MAX-ACCESS read-only STATUS current DESCRIPTION "The measured current on the outlet in hundredth Amps." ::= { st4OutletMonitorEntry 3 } st4OutletCurrentStatus OBJECT-TYPE SYNTAX DeviceStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The status of the measured current on the outlet." ::= { st4OutletMonitorEntry 4 } st4OutletCurrentUtilized OBJECT-TYPE SYNTAX Integer32(-1..1200) UNITS "tenth percent" MAX-ACCESS read-only STATUS current DESCRIPTION "The amount of the outlet current capacity used in tenth percent." ::= { st4OutletMonitorEntry 5 } st4OutletVoltage OBJECT-TYPE SYNTAX Integer32(-1..6000) UNITS "tenth Volts" MAX-ACCESS read-only STATUS current DESCRIPTION "The measured voltage of the outlet in tenth Volts." ::= { st4OutletMonitorEntry 6 } st4OutletActivePower OBJECT-TYPE SYNTAX Integer32(-1..10000) UNITS "Watts" MAX-ACCESS read-only STATUS current DESCRIPTION "The measured active power of the outlet in Watts." ::= { st4OutletMonitorEntry 7 } st4OutletActivePowerStatus OBJECT-TYPE SYNTAX DeviceStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The status of the measured active power of the outlet." ::= { st4OutletMonitorEntry 8 } st4OutletApparentPower OBJECT-TYPE SYNTAX Integer32(-1..10000) UNITS "Volt-Amps" MAX-ACCESS read-only STATUS current DESCRIPTION "The measured apparent power of the outlet in Volt-Amps." ::= { st4OutletMonitorEntry 9 } st4OutletPowerFactor OBJECT-TYPE SYNTAX Integer32(-1..100) UNITS "hundredths" MAX-ACCESS read-only STATUS current DESCRIPTION "The measured power factor of the outlet in hundredths." ::= { st4OutletMonitorEntry 10 } st4OutletPowerFactorStatus OBJECT-TYPE SYNTAX DeviceStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The status of the measured power factor of the outlet." ::= { st4OutletMonitorEntry 11 } st4OutletCurrentCrestFactor OBJECT-TYPE SYNTAX Integer32(-1..250) UNITS "tenths" MAX-ACCESS read-only STATUS current DESCRIPTION "The measured crest factor of the outlet in tenths." ::= { st4OutletMonitorEntry 12 } st4OutletReactance OBJECT-TYPE SYNTAX INTEGER { unknown(0), capacitive(1), inductive(2), resistive(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of the measured reactance of the outlet." ::= { st4OutletMonitorEntry 13 } st4OutletEnergy OBJECT-TYPE SYNTAX Integer32(-1..2147483647) UNITS "Watt-Hours" MAX-ACCESS read-only STATUS current DESCRIPTION "The total energy consumption of the device plugged into the outlet in Watt-Hours." ::= { st4OutletMonitorEntry 14 } -- Outlet Event Configuration Table st4OutletEventConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF St4OutletEventConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Outlet event configuration table." ::= { st4Outlets 4 } st4OutletEventConfigEntry OBJECT-TYPE SYNTAX St4OutletEventConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Event configuration objects for a particular outlet." INDEX { st4UnitIndex, st4InputCordIndex, st4OutletIndex } ::= { st4OutletEventConfigTable 1 } St4OutletEventConfigEntry ::= SEQUENCE { st4OutletNotifications EventNotificationMethods, st4OutletCurrentLowAlarm Integer32, st4OutletCurrentLowWarning Integer32, st4OutletCurrentHighWarning Integer32, st4OutletCurrentHighAlarm Integer32, st4OutletActivePowerLowAlarm Integer32, st4OutletActivePowerLowWarning Integer32, st4OutletActivePowerHighWarning Integer32, st4OutletActivePowerHighAlarm Integer32, st4OutletPowerFactorLowAlarm Integer32, st4OutletPowerFactorLowWarning Integer32 } st4OutletNotifications OBJECT-TYPE SYNTAX EventNotificationMethods MAX-ACCESS read-write STATUS current DESCRIPTION "The notification methods enabled for outlet events." ::= { st4OutletEventConfigEntry 1 } st4OutletCurrentLowAlarm OBJECT-TYPE SYNTAX Integer32(0..1250) UNITS "tenth Amps" MAX-ACCESS read-write STATUS current DESCRIPTION "The current low alarm threshold of the outlet in tenth Amps." ::= { st4OutletEventConfigEntry 2 } st4OutletCurrentLowWarning OBJECT-TYPE SYNTAX Integer32(0..1250) UNITS "tenth Amps" MAX-ACCESS read-write STATUS current DESCRIPTION "The current low warning threshold of the outlet in tenth Amps." ::= { st4OutletEventConfigEntry 3 } st4OutletCurrentHighWarning OBJECT-TYPE SYNTAX Integer32(0..1250) UNITS "tenth Amps" MAX-ACCESS read-write STATUS current DESCRIPTION "The current high warning threshold of the outlet in tenth Amps." ::= { st4OutletEventConfigEntry 4 } st4OutletCurrentHighAlarm OBJECT-TYPE SYNTAX Integer32(0..1250) UNITS "tenth Amps" MAX-ACCESS read-write STATUS current DESCRIPTION "The current high alarm threshold of the outlet in tenth Amps." ::= { st4OutletEventConfigEntry 5 } st4OutletActivePowerLowAlarm OBJECT-TYPE SYNTAX Integer32(0..10000) UNITS "Watts" MAX-ACCESS read-write STATUS current DESCRIPTION "The active power low alarm threshold of the outlet in Watts." ::= { st4OutletEventConfigEntry 6 } st4OutletActivePowerLowWarning OBJECT-TYPE SYNTAX Integer32(0..10000) UNITS "Watts" MAX-ACCESS read-write STATUS current DESCRIPTION "The active power low warning threshold of the outlet in Watts." ::= { st4OutletEventConfigEntry 7 } st4OutletActivePowerHighWarning OBJECT-TYPE SYNTAX Integer32(0..10000) UNITS "Watts" MAX-ACCESS read-write STATUS current DESCRIPTION "The active power high warning threshold of the outlet in Watts." ::= { st4OutletEventConfigEntry 8 } st4OutletActivePowerHighAlarm OBJECT-TYPE SYNTAX Integer32(0..10000) UNITS "Watts" MAX-ACCESS read-write STATUS current DESCRIPTION "The active power high alarm threshold of the outlet in Watts." ::= { st4OutletEventConfigEntry 9 } st4OutletPowerFactorLowAlarm OBJECT-TYPE SYNTAX Integer32(0..100) UNITS "hundredths" MAX-ACCESS read-write STATUS current DESCRIPTION "The low power factor alarm threshold of the outlet in hundredths." ::= { st4OutletEventConfigEntry 10 } st4OutletPowerFactorLowWarning OBJECT-TYPE SYNTAX Integer32(0..100) UNITS "hundredths" MAX-ACCESS read-write STATUS current DESCRIPTION "The low power factor warning threshold of the outlet in hundredths." ::= { st4OutletEventConfigEntry 11 } -- Outlet Control Table st4OutletControlTable OBJECT-TYPE SYNTAX SEQUENCE OF St4OutletControlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Outlet control table." ::= { st4Outlets 5 } st4OutletControlEntry OBJECT-TYPE SYNTAX St4OutletControlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Objects for control of a particular outlet." INDEX { st4UnitIndex, st4InputCordIndex, st4OutletIndex } ::= { st4OutletControlTable 1 } St4OutletControlEntry ::= SEQUENCE { st4OutletControlState INTEGER, st4OutletControlAction INTEGER } st4OutletControlState OBJECT-TYPE SYNTAX INTEGER { notSet(0), -- outlet state is unknown fixedOn(1), -- outlet is uncontrolled (assumed on) idleOff(2), -- outlet has defaulted to off state idleOn(3), -- outlet has defaulted to on state wakeOff(4), -- outlet has been set to off by wakeup wakeOn(5), -- outlet has been set to on by wakeup ocpOff(6), -- outlet is off due to OCP failure ocpOn(7), -- outlet had OCP power loss pendOn(8), -- outlet is off, but will be turning on pendOff(9), -- outlet is on, but will be turning off off(10), -- outlet was turned off by user on(11), -- outlet was turned on by user or reboot event reboot(12), -- outlet is preparing to turn on shutdown(13), -- outlet is preparing to turn off lockedOff(14), -- outlet was locked off by admin lockedOn(15), -- outlet was locked on by admin eventOff(16), -- outlet was turned off by an event eventOn(17), -- outlet was turned on by an event eventReboot(18), -- outlet rebooting due to an event eventShutdown(19) -- outlet shutting down due to an event } MAX-ACCESS read-only STATUS current DESCRIPTION "The control state of the outlet." ::= { st4OutletControlEntry 1 } st4OutletControlAction OBJECT-TYPE SYNTAX INTEGER { none(0), on(1), off(2), reboot(3), queueOn(4), queueOff(5), queueReboot(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "An action to change the control state of the outlet, or to queue an action." ::= { st4OutletControlEntry 2 } -- Outlet Common Control st4OutletCommonControl OBJECT IDENTIFIER ::= { st4Outlets 6 } st4OutletQueueControl OBJECT-TYPE SYNTAX INTEGER { clear(0), commit(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "An action to clear or commit queued outlet control actions. A read of this object returns clear(0) if queue is empty, and commit(1) if the queue is not empty." ::= { st4OutletCommonControl 1 } -- Temperature Sensors st4TemperatureSensors OBJECT IDENTIFIER ::= { st4Objects 9 } -- Temperature Sensor Common Configuration st4TempSensorCommonConfig OBJECT IDENTIFIER ::= { st4TemperatureSensors 1 } st4TempSensorHysteresis OBJECT-TYPE SYNTAX Integer32(0..54) UNITS "degrees" MAX-ACCESS read-write STATUS current DESCRIPTION "The temperature hysteresis of the sensor in degrees, using the scale selected by st4TempSensorScale." ::= { st4TempSensorCommonConfig 1 } st4TempSensorScale OBJECT-TYPE SYNTAX INTEGER { celsius(0), fahrenheit(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "The current scale used for all temperature values." ::= { st4TempSensorCommonConfig 10 } -- Temperature Sensor Configuration Table st4TempSensorConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF St4TempSensorConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Temperature sensor configuration table." ::= { st4TemperatureSensors 2 } st4TempSensorConfigEntry OBJECT-TYPE SYNTAX St4TempSensorConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configuration objects for a particular temperature sensor." INDEX { st4UnitIndex, st4TempSensorIndex } ::= { st4TempSensorConfigTable 1 } St4TempSensorConfigEntry ::= SEQUENCE { st4TempSensorIndex Integer32, st4TempSensorID DisplayString, st4TempSensorName DisplayString, st4TempSensorValueMin Integer32, st4TempSensorValueMax Integer32 } st4TempSensorIndex OBJECT-TYPE SYNTAX Integer32(0..2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Temperature sensor index." ::= { st4TempSensorConfigEntry 1 } st4TempSensorID OBJECT-TYPE SYNTAX DisplayString(SIZE(2)) MAX-ACCESS read-only STATUS current DESCRIPTION "The internal ID of the temperature sensor. Format=AN." ::= { st4TempSensorConfigEntry 2 } st4TempSensorName OBJECT-TYPE SYNTAX DisplayString(SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The name of the temperature sensor." ::= { st4TempSensorConfigEntry 3 } st4TempSensorValueMin OBJECT-TYPE SYNTAX Integer32(-40..253) UNITS "degrees" MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum temperature limit of the sensor in degrees, using the scale selected by st4TempSensorScale." ::= { st4TempSensorConfigEntry 4 } st4TempSensorValueMax OBJECT-TYPE SYNTAX Integer32(-40..253) UNITS "degrees" MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum temperature limit of the sensor in degrees, using the scale selected by st4TempSensorScale." ::= { st4TempSensorConfigEntry 5 } -- Temperature Sensor Monitor Table st4TempSensorMonitorTable OBJECT-TYPE SYNTAX SEQUENCE OF St4TempSensorMonitorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Temperature sensor monitor table." ::= { st4TemperatureSensors 3 } st4TempSensorMonitorEntry OBJECT-TYPE SYNTAX St4TempSensorMonitorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Objects to monitor for a particular temperature sensor." INDEX { st4UnitIndex, st4TempSensorIndex } ::= { st4TempSensorMonitorTable 1 } St4TempSensorMonitorEntry ::= SEQUENCE { st4TempSensorValue Integer32, st4TempSensorStatus DeviceStatus } st4TempSensorValue OBJECT-TYPE SYNTAX Integer32(-410..2540) UNITS "tenth degrees" MAX-ACCESS read-only STATUS current DESCRIPTION "The measured temperature on the sensor in tenth degrees using the scale selected by st4TempSensorScale. -410 means the temperature reading is invalid." ::= { st4TempSensorMonitorEntry 1 } st4TempSensorStatus OBJECT-TYPE SYNTAX DeviceStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The status of the temperature sensor." ::= { st4TempSensorMonitorEntry 2 } -- Temperature Sensor Event Configuration Table st4TempSensorEventConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF St4TempSensorEventConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Temperature sensor event configuration table." ::= { st4TemperatureSensors 4 } st4TempSensorEventConfigEntry OBJECT-TYPE SYNTAX St4TempSensorEventConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Event configuration objects for a particular temperature sensor." INDEX { st4UnitIndex, st4TempSensorIndex } ::= { st4TempSensorEventConfigTable 1 } St4TempSensorEventConfigEntry ::= SEQUENCE { st4TempSensorNotifications EventNotificationMethods, st4TempSensorLowAlarm Integer32, st4TempSensorLowWarning Integer32, st4TempSensorHighWarning Integer32, st4TempSensorHighAlarm Integer32 } st4TempSensorNotifications OBJECT-TYPE SYNTAX EventNotificationMethods MAX-ACCESS read-write STATUS current DESCRIPTION "The notification methods enabled for temperature sensor events." ::= { st4TempSensorEventConfigEntry 1 } st4TempSensorLowAlarm OBJECT-TYPE SYNTAX Integer32(-40..253) UNITS "degrees" MAX-ACCESS read-write STATUS current DESCRIPTION "The low alarm threshold of the temperature sensor in degrees." ::= { st4TempSensorEventConfigEntry 2 } st4TempSensorLowWarning OBJECT-TYPE SYNTAX Integer32(-40..253) UNITS "degrees" MAX-ACCESS read-write STATUS current DESCRIPTION "The low warning threshold of the temperature sensor in degrees." ::= { st4TempSensorEventConfigEntry 3 } st4TempSensorHighWarning OBJECT-TYPE SYNTAX Integer32(-40..253) UNITS "degrees" MAX-ACCESS read-write STATUS current DESCRIPTION "The high warning threshold of the temperature sensor in degrees." ::= { st4TempSensorEventConfigEntry 4 } st4TempSensorHighAlarm OBJECT-TYPE SYNTAX Integer32(-40..253) UNITS "degrees" MAX-ACCESS read-write STATUS current DESCRIPTION "The high alarm threshold of the temperature sensor in degrees." ::= { st4TempSensorEventConfigEntry 5 } -- Humidity Sensors st4HumiditySensors OBJECT IDENTIFIER ::= { st4Objects 10 } -- Humidity Sensor Common Configuration st4HumidSensorCommonConfig OBJECT IDENTIFIER ::= { st4HumiditySensors 1 } st4HumidSensorHysteresis OBJECT-TYPE SYNTAX Integer32(0..20) UNITS "percentage relative humidity" MAX-ACCESS read-write STATUS current DESCRIPTION "The humidity hysteresis of the sensor in percent relative humidity." ::= { st4HumidSensorCommonConfig 1 } -- Humidity Sensor Configuration Table st4HumidSensorConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF St4HumidSensorConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Humidity sensor configuration table." ::= { st4HumiditySensors 2 } st4HumidSensorConfigEntry OBJECT-TYPE SYNTAX St4HumidSensorConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configuration objects for a particular humidity sensor." INDEX { st4UnitIndex, st4HumidSensorIndex } ::= { st4HumidSensorConfigTable 1 } St4HumidSensorConfigEntry ::= SEQUENCE { st4HumidSensorIndex Integer32, st4HumidSensorID DisplayString, st4HumidSensorName DisplayString } st4HumidSensorIndex OBJECT-TYPE SYNTAX Integer32(0..2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Humidity sensor index." ::= { st4HumidSensorConfigEntry 1 } st4HumidSensorID OBJECT-TYPE SYNTAX DisplayString(SIZE(2)) MAX-ACCESS read-only STATUS current DESCRIPTION "The internal ID of the humidity sensor. Format=AN." ::= { st4HumidSensorConfigEntry 2 } st4HumidSensorName OBJECT-TYPE SYNTAX DisplayString(SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The name of the humidity sensor." ::= { st4HumidSensorConfigEntry 3 } -- Humidity Sensor Monitor Table st4HumidSensorMonitorTable OBJECT-TYPE SYNTAX SEQUENCE OF St4HumidSensorMonitorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Humidity sensor monitor table." ::= { st4HumiditySensors 3 } st4HumidSensorMonitorEntry OBJECT-TYPE SYNTAX St4HumidSensorMonitorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Objects to monitor for a particular humidity sensor." INDEX { st4UnitIndex, st4HumidSensorIndex } ::= { st4HumidSensorMonitorTable 1 } St4HumidSensorMonitorEntry ::= SEQUENCE { st4HumidSensorValue Integer32, st4HumidSensorStatus DeviceStatus } st4HumidSensorValue OBJECT-TYPE SYNTAX Integer32(-1..100) UNITS "percentage relative humidity" MAX-ACCESS read-only STATUS current DESCRIPTION "The measured humidity on the sensor in percentage relative humidity." ::= { st4HumidSensorMonitorEntry 1 } st4HumidSensorStatus OBJECT-TYPE SYNTAX DeviceStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The status of the humidity sensor." ::= { st4HumidSensorMonitorEntry 2 } -- Humidity Sensor Event Configuration Table st4HumidSensorEventConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF St4HumidSensorEventConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Humidity sensor event configuration table." ::= { st4HumiditySensors 4 } st4HumidSensorEventConfigEntry OBJECT-TYPE SYNTAX St4HumidSensorEventConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Event configuration objects for a particular humidity sensor." INDEX { st4UnitIndex, st4HumidSensorIndex } ::= { st4HumidSensorEventConfigTable 1 } St4HumidSensorEventConfigEntry ::= SEQUENCE { st4HumidSensorNotifications EventNotificationMethods, st4HumidSensorLowAlarm Integer32, st4HumidSensorLowWarning Integer32, st4HumidSensorHighWarning Integer32, st4HumidSensorHighAlarm Integer32 } st4HumidSensorNotifications OBJECT-TYPE SYNTAX EventNotificationMethods MAX-ACCESS read-write STATUS current DESCRIPTION "The notification methods enabled for humidity sensor events." ::= { st4HumidSensorEventConfigEntry 1 } st4HumidSensorLowAlarm OBJECT-TYPE SYNTAX Integer32(0..100) UNITS "percentage relative humidity" MAX-ACCESS read-write STATUS current DESCRIPTION "The low alarm threshold of the humidity sensor in percentage relative humidity." ::= { st4HumidSensorEventConfigEntry 2 } st4HumidSensorLowWarning OBJECT-TYPE SYNTAX Integer32(0..100) UNITS "percentage relative humidity" MAX-ACCESS read-write STATUS current DESCRIPTION "The low warning threshold of the humidity sensor in percentage relative humidity." ::= { st4HumidSensorEventConfigEntry 3 } st4HumidSensorHighWarning OBJECT-TYPE SYNTAX Integer32(0..100) UNITS "percentage relative humidity" MAX-ACCESS read-write STATUS current DESCRIPTION "The high warning threshold of the humidity sensor in percentage relative humidity." ::= { st4HumidSensorEventConfigEntry 4 } st4HumidSensorHighAlarm OBJECT-TYPE SYNTAX Integer32(0..100) UNITS "percentage relative humidity" MAX-ACCESS read-write STATUS current DESCRIPTION "The high alarm threshold of the humidity sensor in percentage relative humidity." ::= { st4HumidSensorEventConfigEntry 5 } -- Water Sensors st4WaterSensors OBJECT IDENTIFIER ::= { st4Objects 11 } -- Water Sensor Common Configuration st4WaterSensorCommonConfig OBJECT IDENTIFIER ::= { st4WaterSensors 1 } -- Water Sensor Configuration Table st4WaterSensorConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF St4WaterSensorConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Water sensor configuration table." ::= { st4WaterSensors 2 } st4WaterSensorConfigEntry OBJECT-TYPE SYNTAX St4WaterSensorConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configuration objects for a particular water sensor." INDEX { st4UnitIndex, st4WaterSensorIndex } ::= { st4WaterSensorConfigTable 1 } St4WaterSensorConfigEntry ::= SEQUENCE { st4WaterSensorIndex Integer32, st4WaterSensorID DisplayString, st4WaterSensorName DisplayString } st4WaterSensorIndex OBJECT-TYPE SYNTAX Integer32(0..1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Water sensor index." ::= { st4WaterSensorConfigEntry 1 } st4WaterSensorID OBJECT-TYPE SYNTAX DisplayString(SIZE(2)) MAX-ACCESS read-only STATUS current DESCRIPTION "The internal ID of the water sensor. Format=AN." ::= { st4WaterSensorConfigEntry 2 } st4WaterSensorName OBJECT-TYPE SYNTAX DisplayString(SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The name of the water sensor." ::= { st4WaterSensorConfigEntry 3 } -- Water Sensor Monitor Table st4WaterSensorMonitorTable OBJECT-TYPE SYNTAX SEQUENCE OF St4WaterSensorMonitorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Water sensor monitor table." ::= { st4WaterSensors 3 } st4WaterSensorMonitorEntry OBJECT-TYPE SYNTAX St4WaterSensorMonitorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Objects to monitor for a particular water sensor." INDEX { st4UnitIndex, st4WaterSensorIndex } ::= { st4WaterSensorMonitorTable 1 } St4WaterSensorMonitorEntry ::= SEQUENCE { st4WaterSensorStatus DeviceStatus } st4WaterSensorStatus OBJECT-TYPE SYNTAX DeviceStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The status of the water sensor." ::= { st4WaterSensorMonitorEntry 1 } -- Water Sensor Event Configuration Table st4WaterSensorEventConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF St4WaterSensorEventConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Water sensor event configuration table." ::= { st4WaterSensors 4 } st4WaterSensorEventConfigEntry OBJECT-TYPE SYNTAX St4WaterSensorEventConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Event configuration objects for a particular water sensor." INDEX { st4UnitIndex, st4WaterSensorIndex } ::= { st4WaterSensorEventConfigTable 1 } St4WaterSensorEventConfigEntry ::= SEQUENCE { st4WaterSensorNotifications EventNotificationMethods } st4WaterSensorNotifications OBJECT-TYPE SYNTAX EventNotificationMethods MAX-ACCESS read-write STATUS current DESCRIPTION "The notification methods enabled for water sensor events." ::= { st4WaterSensorEventConfigEntry 1 } -- Contact Closures Sensors st4ContactClosureSensors OBJECT IDENTIFIER ::= { st4Objects 12 } -- Contact Closure Sensor Common Configuration st4CcSensorCommonConfig OBJECT IDENTIFIER ::= { st4ContactClosureSensors 1 } -- Contact Closure Sensor Configuration Table st4CcSensorConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF St4CcSensorConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Contact closure sensor configuration table." ::= { st4ContactClosureSensors 2 } st4CcSensorConfigEntry OBJECT-TYPE SYNTAX St4CcSensorConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configuration objects for a particular contact closure sensor." INDEX { st4UnitIndex, st4CcSensorIndex } ::= { st4CcSensorConfigTable 1 } St4CcSensorConfigEntry ::= SEQUENCE { st4CcSensorIndex Integer32, st4CcSensorID DisplayString, st4CcSensorName DisplayString } st4CcSensorIndex OBJECT-TYPE SYNTAX Integer32(0..4) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Contact closure sensor index." ::= { st4CcSensorConfigEntry 1 } st4CcSensorID OBJECT-TYPE SYNTAX DisplayString(SIZE(2)) MAX-ACCESS read-only STATUS current DESCRIPTION "The internal ID of the contact closure sensor. Format=AN." ::= { st4CcSensorConfigEntry 2 } st4CcSensorName OBJECT-TYPE SYNTAX DisplayString(SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The name of the contact closure sensor." ::= { st4CcSensorConfigEntry 3 } -- Contact Closure Sensor Monitor Table st4CcSensorMonitorTable OBJECT-TYPE SYNTAX SEQUENCE OF St4CcSensorMonitorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Contact closure sensor monitor table." ::= { st4ContactClosureSensors 3 } st4CcSensorMonitorEntry OBJECT-TYPE SYNTAX St4CcSensorMonitorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Objects to monitor for a particular contact closure sensor." INDEX { st4UnitIndex, st4CcSensorIndex } ::= { st4CcSensorMonitorTable 1 } St4CcSensorMonitorEntry ::= SEQUENCE { st4CcSensorStatus DeviceStatus } st4CcSensorStatus OBJECT-TYPE SYNTAX DeviceStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The status of the contact closure." ::= { st4CcSensorMonitorEntry 1 } -- Contact Closure Sensor Event Configuration Table st4CcSensorEventConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF St4CcSensorEventConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Contact closure sensor event configuration table." ::= { st4ContactClosureSensors 4 } st4CcSensorEventConfigEntry OBJECT-TYPE SYNTAX St4CcSensorEventConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Event configuration objects for a particular contact closure sensor." INDEX { st4UnitIndex, st4CcSensorIndex } ::= { st4CcSensorEventConfigTable 1 } St4CcSensorEventConfigEntry ::= SEQUENCE { st4CcSensorNotifications EventNotificationMethods } st4CcSensorNotifications OBJECT-TYPE SYNTAX EventNotificationMethods MAX-ACCESS read-write STATUS current DESCRIPTION "The notification methods enabled for contact closure sensor events." ::= { st4CcSensorEventConfigEntry 1 } -- Analog-to-Digital Converter Sensors st4AnalogToDigitalConvSensors OBJECT IDENTIFIER ::= { st4Objects 13 } -- Analog-to-Digital Converter Sensor Common Configuration st4AdcSensorCommonConfig OBJECT IDENTIFIER ::= { st4AnalogToDigitalConvSensors 1 } st4AdcSensorHysteresis OBJECT-TYPE SYNTAX Integer32(0..20) MAX-ACCESS read-write STATUS current DESCRIPTION "The 8-bit count hysteresis of the analog-to-digital converter sensor." ::= { st4AdcSensorCommonConfig 1 } -- Analog-to-Digital Converter Sensor Configuration Table st4AdcSensorConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF St4AdcSensorConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Analog-to-digital converter sensor configuration table." ::= { st4AnalogToDigitalConvSensors 2 } st4AdcSensorConfigEntry OBJECT-TYPE SYNTAX St4AdcSensorConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configuration objects for a particular analog-to-digital converter sensor." INDEX { st4UnitIndex, st4AdcSensorIndex } ::= { st4AdcSensorConfigTable 1 } St4AdcSensorConfigEntry ::= SEQUENCE { st4AdcSensorIndex Integer32, st4AdcSensorID DisplayString, st4AdcSensorName DisplayString } st4AdcSensorIndex OBJECT-TYPE SYNTAX Integer32(0..1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Analog-to-digital converter sensor index." ::= { st4AdcSensorConfigEntry 1 } st4AdcSensorID OBJECT-TYPE SYNTAX DisplayString(SIZE(2)) MAX-ACCESS read-only STATUS current DESCRIPTION "The internal ID of the analog-to-digital converter sensor. Format=AN." ::= { st4AdcSensorConfigEntry 2 } st4AdcSensorName OBJECT-TYPE SYNTAX DisplayString(SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The name of the analog-to-digital converter sensor." ::= { st4AdcSensorConfigEntry 3 } -- Analog-to-Digital Converter Sensor Monitor Table st4AdcSensorMonitorTable OBJECT-TYPE SYNTAX SEQUENCE OF St4AdcSensorMonitorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Analog-to-digital converter sensor monitor table." ::= { st4AnalogToDigitalConvSensors 3 } st4AdcSensorMonitorEntry OBJECT-TYPE SYNTAX St4AdcSensorMonitorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Objects to monitor for a particular analog-to-digital converter sensor." INDEX { st4UnitIndex, st4AdcSensorIndex } ::= { st4AdcSensorMonitorTable 1 } St4AdcSensorMonitorEntry ::= SEQUENCE { st4AdcSensorValue Integer32, st4AdcSensorStatus DeviceStatus } st4AdcSensorValue OBJECT-TYPE SYNTAX Integer32(-1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The 8-bit value from the analog-to-digital converter sensor." ::= { st4AdcSensorMonitorEntry 1 } st4AdcSensorStatus OBJECT-TYPE SYNTAX DeviceStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The status of the analog-to-digital converter sensor." ::= { st4AdcSensorMonitorEntry 2 } -- Analog-to-Digital Converter Sensor Event Configuration Table st4AdcSensorEventConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF St4AdcSensorEventConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Analog-to-digital converter sensor event configuration table." ::= { st4AnalogToDigitalConvSensors 4 } st4AdcSensorEventConfigEntry OBJECT-TYPE SYNTAX St4AdcSensorEventConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Event configuration objects for a particular analog-to-digital converter sensor." INDEX { st4UnitIndex, st4AdcSensorIndex } ::= { st4AdcSensorEventConfigTable 1 } St4AdcSensorEventConfigEntry ::= SEQUENCE { st4AdcSensorNotifications EventNotificationMethods, st4AdcSensorLowAlarm Integer32, st4AdcSensorLowWarning Integer32, st4AdcSensorHighWarning Integer32, st4AdcSensorHighAlarm Integer32 } st4AdcSensorNotifications OBJECT-TYPE SYNTAX EventNotificationMethods MAX-ACCESS read-write STATUS current DESCRIPTION "The notification methods enabled for analog-to-digital converter sensor events." ::= { st4AdcSensorEventConfigEntry 1 } st4AdcSensorLowAlarm OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The 8-bit value for the low alarm threshold of the analog-to-digital converter sensor." ::= { st4AdcSensorEventConfigEntry 2 } st4AdcSensorLowWarning OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The 8-bit value for the low warning threshold of the analog-to-digital converter sensor." ::= { st4AdcSensorEventConfigEntry 3 } st4AdcSensorHighWarning OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The 8-bit value for the high warning threshold of the analog-to-digital converter sensor." ::= { st4AdcSensorEventConfigEntry 4 } st4AdcSensorHighAlarm OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The 8-bit value for the high alarm threshold of the analog-to-digital converter sensor." ::= { st4AdcSensorEventConfigEntry 5 } -- Fan Sensors st4FanSensors OBJECT IDENTIFIER ::= { st4Objects 14 } -- Fan Sensor Common Configuration st4FanSensorCommonConfig OBJECT IDENTIFIER ::= { st4FanSensors 1 } st4FanSensorHysteresis OBJECT-TYPE SYNTAX Integer32(0..1200) UNITS "rotations per minute" MAX-ACCESS read-write STATUS current DESCRIPTION "The fan speed hysteresis of the sensor in rotations per minute." ::= { st4FanSensorCommonConfig 1 } -- Fan Sensor Configuration Table st4FanSensorConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF St4FanSensorConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Fan sensor configuration table." ::= { st4FanSensors 2 } st4FanSensorConfigEntry OBJECT-TYPE SYNTAX St4FanSensorConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configuration objects for a particular fan sensor." INDEX { st4UnitIndex, st4FanSensorIndex } ::= { st4FanSensorConfigTable 1 } St4FanSensorConfigEntry ::= SEQUENCE { st4FanSensorIndex Integer32, st4FanSensorID DisplayString, st4FanSensorName DisplayString } st4FanSensorIndex OBJECT-TYPE SYNTAX Integer32(0..4) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Fan sensor index." ::= { st4FanSensorConfigEntry 1 } st4FanSensorID OBJECT-TYPE SYNTAX DisplayString(SIZE(2)) MAX-ACCESS read-only STATUS current DESCRIPTION "The internal ID of the fan sensor. Format=AN." ::= { st4FanSensorConfigEntry 2 } st4FanSensorName OBJECT-TYPE SYNTAX DisplayString(SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The name of the fan sensor." ::= { st4FanSensorConfigEntry 3 } -- Fan Sensor Monitor Table st4FanSensorMonitorTable OBJECT-TYPE SYNTAX SEQUENCE OF St4FanSensorMonitorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Fan sensor monitor table." ::= { st4FanSensors 3 } st4FanSensorMonitorEntry OBJECT-TYPE SYNTAX St4FanSensorMonitorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Objects to monitor for a particular fan sensor." INDEX { st4UnitIndex, st4FanSensorIndex } ::= { st4FanSensorMonitorTable 1 } St4FanSensorMonitorEntry ::= SEQUENCE { st4FanSensorValue Integer32, st4FanSensorStatus DeviceStatus } st4FanSensorValue OBJECT-TYPE SYNTAX Integer32(-1..15300) UNITS "rotations per minute" MAX-ACCESS read-only STATUS current DESCRIPTION "The measured fan speed of the sensor in rotations per minute." ::= { st4FanSensorMonitorEntry 1 } st4FanSensorStatus OBJECT-TYPE SYNTAX DeviceStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The status of the fan sensor." ::= { st4FanSensorMonitorEntry 2 } -- Fan Sensor Event Configuration Table st4FanSensorEventConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF St4FanSensorEventConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Fan sensor event configuration table." ::= { st4FanSensors 4 } st4FanSensorEventConfigEntry OBJECT-TYPE SYNTAX St4FanSensorEventConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Event configuration objects for a particular fan sensor." INDEX { st4UnitIndex, st4FanSensorIndex } ::= { st4FanSensorEventConfigTable 1 } St4FanSensorEventConfigEntry ::= SEQUENCE { st4FanSensorNotifications EventNotificationMethods, st4FanSensorLowAlarm Integer32, st4FanSensorLowWarning Integer32, st4FanSensorHighWarning Integer32, st4FanSensorHighAlarm Integer32 } st4FanSensorNotifications OBJECT-TYPE SYNTAX EventNotificationMethods MAX-ACCESS read-write STATUS current DESCRIPTION "The notification methods enabled for fan sensor events." ::= { st4FanSensorEventConfigEntry 1 } st4FanSensorLowAlarm OBJECT-TYPE SYNTAX Integer32(0..15300) UNITS "rotations per minute" MAX-ACCESS read-write STATUS current DESCRIPTION "The low alarm threshold of the fan sensor in rotations per minute." ::= { st4FanSensorEventConfigEntry 2 } st4FanSensorLowWarning OBJECT-TYPE SYNTAX Integer32(0..15300) UNITS "rotations per minute" MAX-ACCESS read-write STATUS current DESCRIPTION "The low warning threshold of the fan sensor in rotations per minute." ::= { st4FanSensorEventConfigEntry 3 } st4FanSensorHighWarning OBJECT-TYPE SYNTAX Integer32(0..15300) UNITS "rotations per minute" MAX-ACCESS read-write STATUS current DESCRIPTION "The high warning threshold of the fan sensor in rotations per minute." ::= { st4FanSensorEventConfigEntry 4 } st4FanSensorHighAlarm OBJECT-TYPE SYNTAX Integer32(0..15300) UNITS "rotations per minute" MAX-ACCESS read-write STATUS current DESCRIPTION "The high alarm threshold of the fan sensor in rotations per minute." ::= { st4FanSensorEventConfigEntry 5 } -- Event Information st4EventInformation OBJECT IDENTIFIER ::= { st4Objects 99 } st4EventStatusText OBJECT-TYPE SYNTAX DisplayString(SIZE(0..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The text representation of the enumerated integer value of the most-relevant status or state object included in a trap. The value of this object is set only when sent with a trap. A read of this object will return a NULL string." ::= { st4EventInformation 1 } st4EventStatusCondition OBJECT-TYPE SYNTAX INTEGER { nonError(0), error(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "The condition of the enumerated integer value of the status object included in a trap. The value of this object is set only when sent with a trap. A read of this object will return zero." ::= { st4EventInformation 2 } -- Notification Definitions st4Notifications OBJECT IDENTIFIER ::= { sentry4 100 } -- Events st4Events OBJECT IDENTIFIER ::= { st4Notifications 0 } -- The 0 is for V1 compatibility st4UnitStatusEvent NOTIFICATION-TYPE OBJECTS { st4SystemLocation, st4UnitID, st4UnitName, st4UnitStatus, st4EventStatusText, st4EventStatusCondition } STATUS current DESCRIPTION "Unit status event." --#TYPE "Sentry: Unit Status Event." --#SUMMARY "Status of Unit '%s' (%s) is '%s'." --#ARGUMENTS { 2, 1, 4 } --#SEVERITY CRITICAL --#GENERIC 6 --#CATEGORY "Error Events" --#SOURCE_ID "A" --#TIMEINDEX 255 --#HELP "" --#HELPTAG 0 --#STATE UNKNOWN ::= { st4Events 1 } st4InputCordStatusEvent NOTIFICATION-TYPE OBJECTS { st4SystemLocation, st4InputCordID, st4InputCordName, st4InputCordState, st4InputCordStatus, st4EventStatusText, st4EventStatusCondition } STATUS current DESCRIPTION "Input cord status event." --#TYPE "Sentry: Input Cord Status Event." --#SUMMARY "Status of Input Cord '%s' (%s) is '%s'." --#ARGUMENTS { 2, 1, 5 } --#SEVERITY CRITICAL --#GENERIC 6 --#CATEGORY "Error Events" --#SOURCE_ID "A" --#TIMEINDEX 255 --#HELP "" --#HELPTAG 0 --#STATE UNKNOWN ::= { st4Events 2 } st4InputCordActivePowerEvent NOTIFICATION-TYPE OBJECTS { st4SystemLocation, st4InputCordID, st4InputCordName, st4InputCordActivePower, st4InputCordActivePowerStatus, st4EventStatusText, st4EventStatusCondition } STATUS current DESCRIPTION "Input cord active power event." --#TYPE "Sentry: Input Cord Active Power Event." --#SUMMARY "Active Power Status of Input Cord '%s' (%s) is '%s'." --#ARGUMENTS { 2, 1, 5 } --#SEVERITY CRITICAL --#GENERIC 6 --#CATEGORY "Error Events" --#SOURCE_ID "A" --#TIMEINDEX 255 --#HELP "" --#HELPTAG 0 --#STATE UNKNOWN ::= { st4Events 3 } st4InputCordApparentPowerEvent NOTIFICATION-TYPE OBJECTS { st4SystemLocation, st4InputCordID, st4InputCordName, st4InputCordApparentPower, st4InputCordApparentPowerStatus, st4EventStatusText, st4EventStatusCondition } STATUS current DESCRIPTION "Input cord apparent power event." --#TYPE "Sentry: Input Cord Apparent Power Event." --#SUMMARY "Apparent Power Status of Input Cord '%s' (%s) is '%s'." --#ARGUMENTS { 2, 1, 5 } --#SEVERITY CRITICAL --#GENERIC 6 --#CATEGORY "Error Events" --#SOURCE_ID "A" --#TIMEINDEX 255 --#HELP "" --#HELPTAG 0 --#STATE UNKNOWN ::= { st4Events 4 } st4InputCordPowerFactorEvent NOTIFICATION-TYPE OBJECTS { st4SystemLocation, st4InputCordID, st4InputCordName, st4InputCordPowerFactor, st4InputCordPowerFactorStatus, st4EventStatusText, st4EventStatusCondition } STATUS current DESCRIPTION "Input cord power factor event." --#TYPE "Sentry: Input Cord Power Factor Event." --#SUMMARY "Power Factor Status of Input Cord '%s' (%s) is '%s'." --#ARGUMENTS { 2, 1, 5 } --#SEVERITY CRITICAL --#GENERIC 6 --#CATEGORY "Error Events" --#SOURCE_ID "A" --#TIMEINDEX 255 --#HELP "" --#HELPTAG 0 --#STATE UNKNOWN ::= { st4Events 5 } st4InputCordOutOfBalanceEvent NOTIFICATION-TYPE OBJECTS { st4SystemLocation, st4InputCordID, st4InputCordName, st4InputCordOutOfBalance, st4InputCordOutOfBalanceStatus, st4EventStatusText, st4EventStatusCondition } STATUS current DESCRIPTION "Input cord out-of-balance event." --#TYPE "Sentry: Input Cord Out-of-Balance Event." --#SUMMARY "Out-of-Balance Status of Input Cord '%s' (%s) is '%s'." --#ARGUMENTS { 2, 1, 5 } --#SEVERITY CRITICAL --#GENERIC 6 --#CATEGORY "Error Events" --#SOURCE_ID "A" --#TIMEINDEX 255 --#HELP "" --#HELPTAG 0 --#STATE UNKNOWN ::= { st4Events 6 } st4LineStatusEvent NOTIFICATION-TYPE OBJECTS { st4SystemLocation, st4LineID, st4LineLabel, st4LineState, st4LineStatus, st4EventStatusText, st4EventStatusCondition } STATUS current DESCRIPTION "Line status event." --#TYPE "Sentry: Line Status Event." --#SUMMARY "Status of Line '%s' (%s) is '%s'." --#ARGUMENTS { 2, 1, 5 } --#SEVERITY CRITICAL --#GENERIC 6 --#CATEGORY "Error Events" --#SOURCE_ID "A" --#TIMEINDEX 255 --#HELP "" --#HELPTAG 0 --#STATE UNKNOWN ::= { st4Events 7 } st4LineCurrentEvent NOTIFICATION-TYPE OBJECTS { st4SystemLocation, st4LineID, st4LineLabel, st4LineCurrent, st4LineCurrentStatus, st4EventStatusText, st4EventStatusCondition } STATUS current DESCRIPTION "Line current event." --#TYPE "Sentry: Line Current Event." --#SUMMARY "Current Status of Line '%s' (%s) is '%s'." --#ARGUMENTS { 2, 1, 5 } --#SEVERITY CRITICAL --#GENERIC 6 --#CATEGORY "Error Events" --#SOURCE_ID "A" --#TIMEINDEX 255 --#HELP "" --#HELPTAG 0 --#STATE UNKNOWN ::= { st4Events 8 } st4PhaseStatusEvent NOTIFICATION-TYPE OBJECTS { st4SystemLocation, st4PhaseID, st4PhaseLabel, st4PhaseState, st4PhaseStatus, st4EventStatusText, st4EventStatusCondition } STATUS current DESCRIPTION "Phase status event." --#TYPE "Sentry: Phase Status Event." --#SUMMARY "Status of Phase '%s' (%s) is '%s'." --#ARGUMENTS { 2, 1, 5 } --#SEVERITY CRITICAL --#GENERIC 6 --#CATEGORY "Error Events" --#SOURCE_ID "A" --#TIMEINDEX 255 --#HELP "" --#HELPTAG 0 --#STATE UNKNOWN ::= { st4Events 9 } st4PhaseVoltageEvent NOTIFICATION-TYPE OBJECTS { st4SystemLocation, st4PhaseID, st4PhaseLabel, st4PhaseVoltage, st4PhaseVoltageStatus, st4EventStatusText, st4EventStatusCondition } STATUS current DESCRIPTION "Phase voltage event." --#TYPE "Sentry: Phase Voltage Event." --#SUMMARY "Voltage Status of Phase '%s' (%s) is '%s'." --#ARGUMENTS { 2, 1, 5 } --#SEVERITY CRITICAL --#GENERIC 6 --#CATEGORY "Error Events" --#SOURCE_ID "A" --#TIMEINDEX 255 --#HELP "" --#HELPTAG 0 --#STATE UNKNOWN ::= { st4Events 10 } st4PhasePowerFactorEvent NOTIFICATION-TYPE OBJECTS { st4SystemLocation, st4PhaseID, st4PhaseLabel, st4PhasePowerFactor, st4PhasePowerFactorStatus, st4EventStatusText, st4EventStatusCondition } STATUS current DESCRIPTION "Phase voltage event." --#TYPE "Sentry: Phase Power Factor Event." --#SUMMARY "Power Factor Status of Phase '%s' (%s) is '%s'." --#ARGUMENTS { 2, 1, 5 } --#SEVERITY CRITICAL --#GENERIC 6 --#CATEGORY "Error Events" --#SOURCE_ID "A" --#TIMEINDEX 255 --#HELP "" --#HELPTAG 0 --#STATE UNKNOWN ::= { st4Events 11 } st4OcpStatusEvent NOTIFICATION-TYPE OBJECTS { st4SystemLocation, st4OcpID, st4OcpLabel, st4OcpStatus, st4EventStatusText, st4EventStatusCondition } STATUS current DESCRIPTION "Over-current protector status event." --#TYPE "Sentry: Over-current Protector Status Event." --#SUMMARY "Status of Over-current Protector '%s' (%s) is '%s'." --#ARGUMENTS { 2, 1, 4 } --#SEVERITY CRITICAL --#GENERIC 6 --#CATEGORY "Error Events" --#SOURCE_ID "A" --#TIMEINDEX 255 --#HELP "" --#HELPTAG 0 --#STATE UNKNOWN ::= { st4Events 12 } st4BranchStatusEvent NOTIFICATION-TYPE OBJECTS { st4SystemLocation, st4BranchID, st4BranchLabel, st4BranchState, st4BranchStatus, st4EventStatusText, st4EventStatusCondition } STATUS current DESCRIPTION "Branch status event." --#TYPE "Sentry: Branch Status Event." --#SUMMARY "Status of Branch '%s' (%s) is '%s'." --#ARGUMENTS { 2, 1, 5 } --#SEVERITY CRITICAL --#GENERIC 6 --#CATEGORY "Error Events" --#SOURCE_ID "A" --#TIMEINDEX 255 --#HELP "" --#HELPTAG 0 --#STATE UNKNOWN ::= { st4Events 13 } st4BranchCurrentEvent NOTIFICATION-TYPE OBJECTS { st4SystemLocation, st4BranchID, st4BranchLabel, st4BranchCurrent, st4BranchCurrentStatus, st4EventStatusText, st4EventStatusCondition } STATUS current DESCRIPTION "Branch current event." --#TYPE "Sentry: Branch Current Event." --#SUMMARY "Current Status of Branch '%s' (%s) is '%s'." --#ARGUMENTS { 2, 1, 5 } --#SEVERITY CRITICAL --#GENERIC 6 --#CATEGORY "Error Events" --#SOURCE_ID "A" --#TIMEINDEX 255 --#HELP "" --#HELPTAG 0 --#STATE UNKNOWN ::= { st4Events 14 } st4OutletStatusEvent NOTIFICATION-TYPE OBJECTS { st4SystemLocation, st4OutletID, st4OutletName, st4OutletState, st4OutletStatus, st4OutletControlState, st4EventStatusText, st4EventStatusCondition } STATUS current DESCRIPTION "Outlet status event." --#TYPE "Sentry: Outlet Status Event." --#SUMMARY "Status of Outlet '%s' (%s) is '%s'." --#ARGUMENTS { 2, 1, 6 } --#SEVERITY CRITICAL --#GENERIC 6 --#CATEGORY "Error Events" --#SOURCE_ID "A" --#TIMEINDEX 255 --#HELP "" --#HELPTAG 0 --#STATE UNKNOWN ::= { st4Events 15 } st4OutletStateChangeEvent NOTIFICATION-TYPE OBJECTS { st4SystemLocation, st4OutletID, st4OutletName, st4OutletState, st4OutletStatus, st4OutletControlState, st4EventStatusText, st4EventStatusCondition } STATUS current DESCRIPTION "Outlet state change event." --#TYPE "Sentry: Outlet State Change Event." --#SUMMARY "Outlet '%s' (%s) state has changed to '%s'." --#ARGUMENTS { 2, 1, 6 } --#SEVERITY INFORMATIONAL --#GENERIC 6 --#CATEGORY "Information Events" --#SOURCE_ID "A" --#TIMEINDEX 255 --#HELP "" --#HELPTAG 0 --#STATE UNKNOWN ::= { st4Events 16 } st4OutletCurrentEvent NOTIFICATION-TYPE OBJECTS { st4SystemLocation, st4OutletID, st4OutletName, st4OutletCurrent, st4OutletCurrentStatus, st4EventStatusText, st4EventStatusCondition } STATUS current DESCRIPTION "Outlet current event." --#TYPE "Sentry: Outlet Current Event." --#SUMMARY "Current Status of Outlet '%s' (%s) is '%s'." --#ARGUMENTS { 2, 1, 5 } --#SEVERITY CRITICAL --#GENERIC 6 --#CATEGORY "Error Events" --#SOURCE_ID "A" --#TIMEINDEX 255 --#HELP "" --#HELPTAG 0 --#STATE UNKNOWN ::= { st4Events 17 } st4OutletActivePowerEvent NOTIFICATION-TYPE OBJECTS { st4SystemLocation, st4OutletID, st4OutletName, st4OutletActivePower, st4OutletActivePowerStatus, st4EventStatusText, st4EventStatusCondition } STATUS current DESCRIPTION "Outlet active power event." --#TYPE "Sentry: Outlet Active Power Event." --#SUMMARY "Active Power Status of Outlet '%s' (%s) is '%s'." --#ARGUMENTS { 2, 1, 5 } --#SEVERITY CRITICAL --#GENERIC 6 --#CATEGORY "Error Events" --#SOURCE_ID "A" --#TIMEINDEX 255 --#HELP "" --#HELPTAG 0 --#STATE UNKNOWN ::= { st4Events 18 } st4OutletPowerFactorEvent NOTIFICATION-TYPE OBJECTS { st4SystemLocation, st4OutletID, st4OutletName, st4OutletPowerFactor, st4OutletPowerFactorStatus, st4EventStatusText, st4EventStatusCondition } STATUS current DESCRIPTION "Outlet power factor event." --#TYPE "Sentry: Outlet Power Factor Event." --#SUMMARY "Power Factor Status of Outlet '%s' (%s) is '%s'." --#ARGUMENTS { 2, 1, 5 } --#SEVERITY CRITICAL --#GENERIC 6 --#CATEGORY "Error Events" --#SOURCE_ID "A" --#TIMEINDEX 255 --#HELP "" --#HELPTAG 0 --#STATE UNKNOWN ::= { st4Events 19 } st4TempSensorEvent NOTIFICATION-TYPE OBJECTS { st4SystemLocation, st4TempSensorID, st4TempSensorName, st4TempSensorValue, st4TempSensorStatus, st4TempSensorScale, st4EventStatusText, st4EventStatusCondition } STATUS current DESCRIPTION "Temperature sensor event." --#TYPE "Sentry: Temperature Sensor Event." --#SUMMARY "Status of Temperature Sensor '%s' (%s) is '%s'." --#ARGUMENTS { 2, 1, 6 } --#SEVERITY CRITICAL --#GENERIC 6 --#CATEGORY "Error Events" --#SOURCE_ID "A" --#TIMEINDEX 255 --#HELP "" --#HELPTAG 0 --#STATE UNKNOWN ::= { st4Events 20 } st4HumidSensorEvent NOTIFICATION-TYPE OBJECTS { st4SystemLocation, st4HumidSensorID, st4HumidSensorName, st4HumidSensorValue, st4HumidSensorStatus, st4EventStatusText, st4EventStatusCondition } STATUS current DESCRIPTION "Humidity sensor event." --#TYPE "Sentry: Humidity Sensor Event." --#SUMMARY "Status of Humidity Sensor '%s' (%s) is '%s'." --#ARGUMENTS { 2, 1, 5 } --#SEVERITY CRITICAL --#GENERIC 6 --#CATEGORY "Error Events" --#SOURCE_ID "A" --#TIMEINDEX 255 --#HELP "" --#HELPTAG 0 --#STATE UNKNOWN ::= { st4Events 21 } st4WaterSensorStatusEvent NOTIFICATION-TYPE OBJECTS { st4SystemLocation, st4WaterSensorID, st4WaterSensorName, st4WaterSensorStatus, st4EventStatusText, st4EventStatusCondition } STATUS current DESCRIPTION "Water sensor status event." --#TYPE "Sentry: Water Sensor Status Event." --#SUMMARY "Status of Water Sensor '%s' (%s) is '%s'." --#ARGUMENTS { 2, 1, 4 } --#SEVERITY CRITICAL --#GENERIC 6 --#CATEGORY "Error Events" --#SOURCE_ID "A" --#TIMEINDEX 255 --#HELP "" --#HELPTAG 0 --#STATE UNKNOWN ::= { st4Events 22 } st4CcSensorStatusEvent NOTIFICATION-TYPE OBJECTS { st4SystemLocation, st4CcSensorID, st4CcSensorName, st4CcSensorStatus, st4EventStatusText, st4EventStatusCondition } STATUS current DESCRIPTION "Contact closure sensor status event." --#TYPE "Sentry: Contact Closure Sensor Status Event." --#SUMMARY "Status of Contact Closure Sensor '%s' (%s) is '%s'." --#ARGUMENTS { 2, 1, 4 } --#SEVERITY CRITICAL --#GENERIC 6 --#CATEGORY "Error Events" --#SOURCE_ID "A" --#TIMEINDEX 255 --#HELP "" --#HELPTAG 0 --#STATE UNKNOWN ::= { st4Events 23 } st4AdcSensorEvent NOTIFICATION-TYPE OBJECTS { st4SystemLocation, st4AdcSensorID, st4AdcSensorName, st4AdcSensorValue, st4AdcSensorStatus, st4EventStatusText, st4EventStatusCondition } STATUS current DESCRIPTION "Analog-to-digital converter sensor event." --#TYPE "Sentry: Analog-to-Digital Converter Sensor Event." --#SUMMARY "Status of Analog-to-Digital Converter Sensor '%s' (%s) is '%s'." --#ARGUMENTS { 2, 1, 5 } --#SEVERITY CRITICAL --#GENERIC 6 --#CATEGORY "Error Events" --#SOURCE_ID "A" --#TIMEINDEX 255 --#HELP "" --#HELPTAG 0 --#STATE UNKNOWN ::= { st4Events 24 } st4FanSensorEvent NOTIFICATION-TYPE OBJECTS { st4SystemLocation, st4FanSensorID, st4FanSensorName, st4FanSensorValue, st4FanSensorStatus, st4EventStatusText, st4EventStatusCondition } STATUS current DESCRIPTION "Fan sensor event." --#TYPE "Sentry: Fan Sensor Event." --#SUMMARY "Status of Fan Sensor '%s' (%s) is '%s'." --#ARGUMENTS { 2, 1, 4 } --#SEVERITY CRITICAL --#GENERIC 6 --#CATEGORY "Error Events" --#SOURCE_ID "A" --#TIMEINDEX 255 --#HELP "" --#HELPTAG 0 --#STATE UNKNOWN ::= { st4Events 25 } -- Conformance Definitions st4Conformance OBJECT IDENTIFIER ::= { sentry4 200 } -- Object/Notification Groups st4Groups OBJECT IDENTIFIER ::= { st4Conformance 1 } st4SystemObjectsGroup OBJECT-GROUP OBJECTS { st4SystemProductName, st4SystemLocation, st4SystemFirmwareVersion, st4SystemFirmwareBuildInfo, st4SystemNICSerialNumber, st4SystemNICHardwareInfo, st4SystemProductSeries, st4SystemFeatures, st4SystemFeatureKey, st4SystemConfigModifiedCount, st4SystemUnitCount } STATUS current DESCRIPTION "System objects group." ::= { st4Groups 1 } st4UnitObjectsGroup OBJECT-GROUP OBJECTS { st4UnitID, st4UnitName, st4UnitProductSN, st4UnitModel, st4UnitAssetTag, st4UnitType, st4UnitCapabilities, st4UnitProductMfrDate, st4UnitDisplayOrientation, st4UnitOutletSequenceOrder, st4UnitOutletDisplayOrder, st4UnitInputCordCount, st4UnitTempSensorCount, st4UnitHumidSensorCount, st4UnitWaterSensorCount, st4UnitCcSensorCount, st4UnitAdcSensorCount, st4UnitFanSensorCount, st4UnitStatus, st4UnitNotifications } STATUS current DESCRIPTION "Unit objects group." ::= { st4Groups 2 } st4InputCordObjectsGroup OBJECT-GROUP OBJECTS { st4InputCordActivePowerHysteresis, st4InputCordApparentPowerHysteresis, st4InputCordPowerFactorHysteresis, st4InputCordOutOfBalanceHysteresis, st4InputCordID, st4InputCordName, st4InputCordInletType, st4InputCordNominalVoltage, st4InputCordNominalVoltageMin, st4InputCordNominalVoltageMax, st4InputCordCurrentCapacity, st4InputCordCurrentCapacityMax, st4InputCordPowerCapacity, st4InputCordNominalPowerFactor, st4InputCordLineCount, st4InputCordPhaseCount, st4InputCordOcpCount, st4InputCordBranchCount, st4InputCordOutletCount, st4InputCordState, st4InputCordStatus, st4InputCordActivePower, st4InputCordActivePowerStatus, st4InputCordApparentPower, st4InputCordApparentPowerStatus, st4InputCordPowerUtilized, st4InputCordPowerFactor, st4InputCordPowerFactorStatus, st4InputCordEnergy, st4InputCordFrequency, st4InputCordOutOfBalance, st4InputCordOutOfBalanceStatus, st4InputCordNotifications, st4InputCordActivePowerLowAlarm, st4InputCordActivePowerLowWarning, st4InputCordActivePowerHighWarning, st4InputCordActivePowerHighAlarm, st4InputCordApparentPowerLowAlarm, st4InputCordApparentPowerLowWarning, st4InputCordApparentPowerHighWarning, st4InputCordApparentPowerHighAlarm, st4InputCordPowerFactorLowAlarm, st4InputCordPowerFactorLowWarning, st4InputCordOutOfBalanceHighWarning, st4InputCordOutOfBalanceHighAlarm } STATUS current DESCRIPTION "Input cord objects group." ::= { st4Groups 3 } st4LineObjectsGroup OBJECT-GROUP OBJECTS { st4LineCurrentHysteresis, st4LineID, st4LineLabel, st4LineCurrentCapacity, st4LineState, st4LineStatus, st4LineCurrent, st4LineCurrentStatus, st4LineCurrentUtilized, st4LineNotifications, st4LineCurrentLowAlarm, st4LineCurrentLowWarning, st4LineCurrentHighWarning, st4LineCurrentHighAlarm } STATUS current DESCRIPTION "Line objects group." ::= { st4Groups 4 } st4PhaseObjectsGroup OBJECT-GROUP OBJECTS { st4PhaseVoltageHysteresis, st4PhasePowerFactorHysteresis, st4PhaseID, st4PhaseLabel, st4PhaseNominalVoltage, st4PhaseBranchCount, st4PhaseOutletCount, st4PhaseState, st4PhaseStatus, st4PhaseVoltage, st4PhaseVoltageStatus, st4PhaseVoltageDeviation, st4PhaseCurrent, st4PhaseCurrentCrestFactor, st4PhaseActivePower, st4PhaseApparentPower, st4PhasePowerFactor, st4PhasePowerFactorStatus, st4PhaseReactance, st4PhaseEnergy, st4PhaseNotifications, st4PhaseVoltageLowAlarm, st4PhaseVoltageLowWarning, st4PhaseVoltageHighWarning, st4PhaseVoltageHighAlarm, st4PhasePowerFactorLowAlarm, st4PhasePowerFactorLowWarning } STATUS current DESCRIPTION "Phase objects group." ::= { st4Groups 5 } st4OcpObjectsGroup OBJECT-GROUP OBJECTS { st4OcpID, st4OcpLabel, st4OcpType, st4OcpCurrentCapacity, st4OcpCurrentCapacityMax, st4OcpBranchCount, st4OcpOutletCount, st4OcpStatus, st4OcpNotifications } STATUS current DESCRIPTION "Over-current protector objects group." ::= { st4Groups 6 } st4BranchObjectsGroup OBJECT-GROUP OBJECTS { st4BranchCurrentHysteresis, st4BranchID, st4BranchLabel, st4BranchCurrentCapacity, st4BranchPhaseID, st4BranchOcpID, st4BranchOutletCount, st4BranchState, st4BranchStatus, st4BranchCurrent, st4BranchCurrentStatus, st4BranchCurrentUtilized, st4BranchNotifications, st4BranchCurrentLowAlarm, st4BranchCurrentLowWarning, st4BranchCurrentHighWarning, st4BranchCurrentHighAlarm } STATUS current DESCRIPTION "Branch objects group." ::= { st4Groups 7 } st4OutletObjectsGroup OBJECT-GROUP OBJECTS { st4OutletCurrentHysteresis, st4OutletActivePowerHysteresis, st4OutletPowerFactorHysteresis, st4OutletSequenceInterval, st4OutletRebootDelay, st4OutletStateChangeLogging, st4OutletID, st4OutletName, st4OutletCapabilities, st4OutletSocketType, st4OutletCurrentCapacity, st4OutletPowerCapacity, st4OutletSocketAdapter, st4OutletWakeupState, st4OutletPostOnDelay, st4OutletPhaseID, st4OutletOcpID, st4OutletBranchID, st4OutletState, st4OutletStatus, st4OutletCurrent, st4OutletCurrentStatus, st4OutletCurrentUtilized, st4OutletVoltage, st4OutletActivePower, st4OutletActivePowerStatus, st4OutletApparentPower, st4OutletPowerFactor, st4OutletPowerFactorStatus, st4OutletCurrentCrestFactor, st4OutletReactance, st4OutletEnergy, st4OutletNotifications, st4OutletCurrentLowAlarm, st4OutletCurrentLowWarning, st4OutletCurrentHighWarning, st4OutletCurrentHighAlarm, st4OutletActivePowerLowAlarm, st4OutletActivePowerLowWarning, st4OutletActivePowerHighWarning, st4OutletActivePowerHighAlarm, st4OutletPowerFactorLowAlarm, st4OutletPowerFactorLowWarning, st4OutletControlState, st4OutletControlAction, st4OutletQueueControl } STATUS current DESCRIPTION "Outlet objects group." ::= { st4Groups 8 } st4TempSensorObjectsGroup OBJECT-GROUP OBJECTS { st4TempSensorHysteresis, st4TempSensorScale, st4TempSensorID, st4TempSensorName, st4TempSensorValueMin, st4TempSensorValueMax, st4TempSensorValue, st4TempSensorStatus, st4TempSensorNotifications, st4TempSensorLowAlarm, st4TempSensorLowWarning, st4TempSensorHighWarning, st4TempSensorHighAlarm } STATUS current DESCRIPTION "Temperature sensor objects group." ::= { st4Groups 9 } st4HumidSensorObjectsGroup OBJECT-GROUP OBJECTS { st4HumidSensorHysteresis, st4HumidSensorID, st4HumidSensorName, st4HumidSensorValue, st4HumidSensorStatus, st4HumidSensorNotifications, st4HumidSensorLowAlarm, st4HumidSensorLowWarning, st4HumidSensorHighWarning, st4HumidSensorHighAlarm } STATUS current DESCRIPTION "Humidity sensor objects group." ::= { st4Groups 10 } st4WaterSensorObjectsGroup OBJECT-GROUP OBJECTS { st4WaterSensorID, st4WaterSensorName, st4WaterSensorStatus, st4WaterSensorNotifications } STATUS current DESCRIPTION "Water sensor objects group." ::= { st4Groups 11 } st4CcSensorObjectsGroup OBJECT-GROUP OBJECTS { st4CcSensorID, st4CcSensorName, st4CcSensorStatus, st4CcSensorNotifications } STATUS current DESCRIPTION "Contact closure sensor objects group." ::= { st4Groups 12 } st4AdcSensorObjectsGroup OBJECT-GROUP OBJECTS { st4AdcSensorHysteresis, st4AdcSensorID, st4AdcSensorName, st4AdcSensorValue, st4AdcSensorStatus, st4AdcSensorNotifications, st4AdcSensorLowAlarm, st4AdcSensorLowWarning, st4AdcSensorHighWarning, st4AdcSensorHighAlarm } STATUS current DESCRIPTION "Analog-to-digital converter sensor objects group." ::= { st4Groups 13 } st4FanSensorObjectsGroup OBJECT-GROUP OBJECTS { st4FanSensorHysteresis, st4FanSensorID, st4FanSensorName, st4FanSensorValue, st4FanSensorStatus, st4FanSensorNotifications, st4FanSensorLowAlarm, st4FanSensorLowWarning, st4FanSensorHighWarning, st4FanSensorHighAlarm } STATUS current DESCRIPTION "Fan sensor objects group." ::= { st4Groups 14 } st4EventInfoObjectsGroup OBJECT-GROUP OBJECTS { st4EventStatusText, st4EventStatusCondition } STATUS current DESCRIPTION "Event information objects group." ::= { st4Groups 99 } st4EventNotificationsGroup NOTIFICATION-GROUP NOTIFICATIONS { st4UnitStatusEvent, st4InputCordStatusEvent, st4InputCordActivePowerEvent, st4InputCordApparentPowerEvent, st4InputCordPowerFactorEvent, st4InputCordOutOfBalanceEvent, st4LineStatusEvent, st4LineCurrentEvent, st4PhaseStatusEvent, st4PhaseVoltageEvent, st4PhasePowerFactorEvent, st4OcpStatusEvent, st4BranchStatusEvent, st4BranchCurrentEvent, st4OutletStatusEvent, st4OutletStateChangeEvent, st4OutletCurrentEvent, st4OutletActivePowerEvent, st4OutletPowerFactorEvent, st4TempSensorEvent, st4HumidSensorEvent, st4WaterSensorStatusEvent, st4CcSensorStatusEvent, st4AdcSensorEvent, st4FanSensorEvent } STATUS current DESCRIPTION "Event notifications group." ::= { st4Groups 100 } -- Compliance Statements st4Compliances OBJECT IDENTIFIER ::= { st4Conformance 2 } st4ModuleCompliances MODULE-COMPLIANCE STATUS current DESCRIPTION "The requirements for conformance to the Sentry4-MIB." MODULE GROUP st4SystemObjectsGroup DESCRIPTION "System objects group." GROUP st4UnitObjectsGroup DESCRIPTION "Unit objects group." GROUP st4InputCordObjectsGroup DESCRIPTION "Input cord objects group." GROUP st4LineObjectsGroup DESCRIPTION "Line objects group." GROUP st4PhaseObjectsGroup DESCRIPTION "Phase objects group." GROUP st4OcpObjectsGroup DESCRIPTION "Over-current protector objects group." GROUP st4BranchObjectsGroup DESCRIPTION "Branch objects group." GROUP st4OutletObjectsGroup DESCRIPTION "Outlet objects group." GROUP st4TempSensorObjectsGroup DESCRIPTION "Temperature sensor objects group." GROUP st4HumidSensorObjectsGroup DESCRIPTION "Humidity sensor objects group." GROUP st4WaterSensorObjectsGroup DESCRIPTION "Water sensor objects group." GROUP st4CcSensorObjectsGroup DESCRIPTION "Contact closure sensor objects group." GROUP st4AdcSensorObjectsGroup DESCRIPTION "Analog-to-digital converter sensor objects group." GROUP st4FanSensorObjectsGroup DESCRIPTION "Fan sensor objects group." GROUP st4EventInfoObjectsGroup DESCRIPTION "Event information objects group." GROUP st4EventNotificationsGroup DESCRIPTION "Event notifications group." ::= { st4Compliances 1 } END